i have a problem with the newest firmware.... since yesterday domain access does not work, so i tried to rejoin, but this also fails. i joined a fresh install debian sucessfully to the domain to make sure the dc are not the problem and have 2 other qnaps which work perfectly in the samba 4 ad domain....one of them has QTS 4.2 the other one the newest firmware
here's the log:
my setup
3x Samba 4.7 DC controllers
3x QNAP, 2 of them run perfectly
Firmware of the one which is unable to join QTS 4.3.3.0361.
German-text:
Microsoft-Netzwerkeinstellungen fehlgeschlagen. Bitte prüfen Sie den DNS-Server, den Domänennamen, den Benutzernamen und das Kennwort für das Anmelden bei der Domäne.
======== DEBUG START =======
/usr/local/samba/bin/net time set -S SAMBA01.dns.domain
[command] echo ******** | /usr/bin/kinit "user@dns.domain"
Password for user@dns.domain:
Specify WORKGROUP = WORKGROUP
[command] /usr/local/samba/bin/net ads join -S SAMBA01 -U "user%********" -s /etc/config/smb.conf
Could not initialise message context. Try running as root
Failed to join domain: Access is denied
I can ping all three dcs from the qnap box
Can't join domain
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: Can't join domain
Hi and welcome to the forum.
Please don't post the same problem in multiple topics. I've removed your duplicate post.
Please don't post the same problem in multiple topics. I've removed your duplicate post.
-
- Starting out
- Posts: 13
- Joined: Fri Nov 03, 2017 11:09 pm
Re: Can't join domain
sorry - i thought as repley it might not be seen....
-
- Starting out
- Posts: 13
- Joined: Fri Nov 03, 2017 11:09 pm
Re: Can't join domain
this is strange - i tried a readonly dc - and it worked to join - a more complex variant, but ok...
any explanation?
any explanation?
-
- Starting out
- Posts: 13
- Joined: Fri Nov 03, 2017 11:09 pm
Re: Can't join domain
readonly dc means,, i configured the qnap as readonly dc