That is not totally true, there are 2 docker daemons running on QNAP, one is the container station: unix:///var/run/docker.sock and the 2nd one is actually a system docker (for example notes station 3 is running under this daemon) and is located unix:///var/run/system-docker.sock.slally wrote:dockerd is started on my setup. The problem is that the new version of Container Station has it listening on unix:///var/run/system-docker.sock While docker and the Container Station gui are trying to connect via unix:///var/run/docker.sock Think I'm just going to do the downgrade as well. Thanks to those who submitted tickets.
Container station don't start after upgrade to V1.8.3062
-
- First post
- Posts: 1
- Joined: Sat Jan 02, 2016 4:40 am
Re: Container station don't start after upgrade to V1.8.3062
-
- New here
- Posts: 2
- Joined: Fri Jun 24, 2016 9:05 pm
Re: Container station don't start after upgrade to V1.8.3062
Thanks for the update. Poor quality control from QNAP - doesn't fill me with confidence.Guapo81 wrote:Got answer from QNAP support:
Downloaded latest version from QNAP site, essentially same as answers above, they rolled it back a version and put the app in Beta.QNAP Support wrote: Dear customer,
Please download the container station and let me know the results.
Kind regards,
QNAP support
At least all is working fine again and other apps are not complaining about latest version of container station anymore.
-
- Know my way around
- Posts: 195
- Joined: Thu Mar 12, 2015 10:58 pm
- Location: near Venice, Italy
Re: Container station don't start after upgrade to V1.8.3062
Same problem and CPU stucked at 50%
QNAP TS-451+ / QTS 4.5 / 8GB (4+4) Kingston KVR16LS11 / WD RED 4TB(x4) RAID5 / Remote QNAP RM-IR002 / Logitech K400 White / APC Back-UPS ES 550G
AVR: ONKYO TX-NR609 / TV: Hisense H65M7000
AVR: ONKYO TX-NR609 / TV: Hisense H65M7000
-
- Know my way around
- Posts: 195
- Joined: Thu Mar 12, 2015 10:58 pm
- Location: near Venice, Italy
Re: Container station don't start after upgrade to V1.8.3062
Any news?
QNAP TS-451+ / QTS 4.5 / 8GB (4+4) Kingston KVR16LS11 / WD RED 4TB(x4) RAID5 / Remote QNAP RM-IR002 / Logitech K400 White / APC Back-UPS ES 550G
AVR: ONKYO TX-NR609 / TV: Hisense H65M7000
AVR: ONKYO TX-NR609 / TV: Hisense H65M7000
-
- Starting out
- Posts: 27
- Joined: Wed Feb 17, 2016 9:03 pm
Re: Container station don't start after upgrade to V1.8.3062
version 1.8.3062 has been marked as "Beta", if you manually downgrade to the previous version, as explained on one of the first posts, you won't be asked to upgrade to the new (bugged) version.
-
- Easy as a breeze
- Posts: 365
- Joined: Sat Jul 14, 2012 8:24 pm
Re: Container station don't start after upgrade to V1.8.3062
Thanks for this, looks like things are still broke after updating my FW and apps after the latest security bulletin today. Although I had to edit the qpkg.conf file to now show as version number 1.8.3103 in order to get browser station to start.orogers wrote:I downloaded a slightly older version (1.8.3031) and it's working fine now. Will wait for the next release before upgrading.
https://download.qnap.com/QPKG/containe ... 31_x86.zip
*Edit: Eh, well, Browser Station won't start until you do the version string edit in /etc/config/qpkg.conf (make it 1.8.3062) else starting Browser Station will try to update Container Station at the same time.
Unless I'm being blind, I can't find the setting to change what kind of QNAP I have on my profile. I now own a TS-253A
-
- New here
- Posts: 2
- Joined: Mon Aug 28, 2017 10:54 pm
Re: Container station don't start after upgrade to V1.8.3062
Sadly I'm in the same boat.
I upgraded Container Station today and it then failed to load with a bunch of HTTP 503 errors in the browser console saying Container Station was overloaded.
After numerous reboots, attempts to remove Container Station, reinstallations, I'm now stuck with the error about being unable to connect to the docker daemon.
I have raised a support ticket with QNAP to try and get things running again.
I upgraded Container Station today and it then failed to load with a bunch of HTTP 503 errors in the browser console saying Container Station was overloaded.
After numerous reboots, attempts to remove Container Station, reinstallations, I'm now stuck with the error about being unable to connect to the docker daemon.
I have raised a support ticket with QNAP to try and get things running again.
-
- First post
- Posts: 1
- Joined: Sat Feb 19, 2011 8:45 pm
Re: Container station don't start after upgrade to V1.8.3062
I installed the previous version provided here. Also run qvr pro. This won’t start. It updates cs and than i am stucked again with the deamon problem. So no camer’s nothing. Any suggestions?
Thanks, Ed
Thanks, Ed
-
- New here
- Posts: 2
- Joined: Mon Aug 28, 2017 10:54 pm
Re: Container station don't start after upgrade to V1.8.3062
I had support look at my system and even after a couple of firmware updates and another update to Container Station things still weren't working.
In the end, level 2 support connected remotely and did something to fix it.
I beleive a fix for this is coming out in the next version (1.8.3145+), so keep an eye out for this.
In the end, level 2 support connected remotely and did something to fix it.
I beleive a fix for this is coming out in the next version (1.8.3145+), so keep an eye out for this.
-
- Easy as a breeze
- Posts: 365
- Joined: Sat Jul 14, 2012 8:24 pm
Re: Container station don't start after upgrade to V1.8.3062
I noticed today randomly looking at my apps, that Browser Station is now out of date, although not showing as being out of date because those of us that had this problem manually edited the version string.
Does anyone know if its now OK to install the latest Browser Station (1.1.660) with the latest Container Station (1.9.3590)
Does anyone know if its now OK to install the latest Browser Station (1.1.660) with the latest Container Station (1.9.3590)
You do not have the required permissions to view the files attached to this post.
Unless I'm being blind, I can't find the setting to change what kind of QNAP I have on my profile. I now own a TS-253A