[QSonarr] [2.0.0.5338] Smart PVR for newsgroup and bittorrent users

[CamTheSnapper]

I'll install that now and see if it helps. I'm not sure how this happened however Sonarr and Sabnzbd seemed to be trying to run on the same port. Sorted it out eventually but I can't figure out why Sonarr shows the startup port as 8800 when that is the port for Sabnzbd.

[Skeptical.me]

I'll install that now and see if it helps. I'm not sure how this happened however Sonarr and Sabnzbd seemed to be trying to run on the same port. Sorted it out eventually but I can't figure out why Sonarr shows the startup port as 8800 when that is the port for Sabnzbd.

If I had the answer I'd give it to you, I'm baffled as to why that is occurring. And also I use NZBGet.

[Skeptical.me]

I'll install that now and see if it helps. I'm not sure how this happened however Sonarr and Sabnzbd seemed to be trying to run on the same port. Sorted it out eventually but I can't figure out why Sonarr shows the startup port as 8800 when that is the port for Sabnzbd.

Mine has always shown port 8989

Qsonarr.png

[ant191]

Hey All,
I keep getting errors in relation to - : Syntax Error after '<!' characters.
I've done a quick google and it points to Qmono being out of date.
Issue is I can't get the latest to run on my nas, it is a bit older TS-559 Pro+. I keep getting an error pointing issues with the libm.so.6 architecture.

When Qmono "Qmono_5.14.0.177_x86_64.qpkg" is installed, it will not boot.
[~] # /opt/Qmono/bin/mono --version
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32
[~] # /share/MD0_DATA/.qpkg/Qmono/Qmono.sh start
/share/MD0_DATA/.qpkg/Qmono/Qmono.sh: line 24: /usr/share/.mono: is a directory
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32

When "Qmono_3.10.0.0_x86.qpkg" is installed it boots fine.
[~] # /opt/Qmono/bin/mono --version
Mono JIT compiler version 3.10.0 (tarball Fri Apr 24 14:18:37 EDT 2015)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: altstack
Notifications: epoll
Architecture: x86
Disabled: none
Misc: softdebug
LLVM: supported, not enabled.
GC: sgen

[~] # uname -a
Linux NAS 3.4.6 #1 SMP Fri Oct 26 12:47:07 CST 2018 x86_64 unknown

I can see a few people have run into this, I've done a ton of googling but am stumped on this one.
Any ideas?

[antakar]

My Qsonarr do not start anymore after one of latest QNAP updates.

I am unable to backup config using the UI.

What do I need to backup manually using filesystem?
I intend to install Sonarr 3 as QSonarr 2 could have been disabled by QNAP in the same way NZBget has been disabled...

Not Cool QNAP, not f...n cool!

[pete0r]

Did you figure this out - i am still having issues getting sonarr or radarr to work

[antakar]

No, I haven't. I think the database and config were deleted. I don't know.

[pete0r]

Hey antaker - sorted my issue.
I had to remove mono and find install an x86 version for the qnap. After that it all came back to life

[bassar]

*BUMP*

Apologies, but would love some guidance or suggestions here if anyone has any ideas?
Thanks in advance..

Hi there, I'm having issues with my install of QSonarr (configuration below).

Once a download completes (using SAB), QSonarr reports that it is "Unable to determine if file is a sample" for EVERY download.
Whilst I can perform a Manual Import, I would like to get this working... Does anyone have any suggestions, please?

System configuration notes:
NAS: TS-459
Firmware: 4.2.6
QMono: 5.4.1.6.0 (x86)
QSonarr: 2.0.0.5163 (x86) - updated in app to 2.0.0.5228
QSonarr - Status (warning): MediaInfo Library could not be loaded libmediainfo.so.0
QSonarr - Settings/Media Management/Permissions - both file and folder chmod are 0777
SABnzbdplus 180427 via SHERPA
SAB config: User Folders/Permissions for completed downloads: 777

Try installing this - fixed the error for me
https://www.qnapclub.eu/en/qpkg/712

[Th3K1pp3r]

Hi
After a minor disaster with a raid group I re-initialised my NAS. Everything was fine - time to re-install Sonarr, Radarr and NZBGET.
NAS: TS453Pro
Firmware: 4.4.1.1086 / 64bit
Memory: 8GB
QMono: 5.20.1.19
QSonarr: 2.0.0.5163
QNZBGet: 21.0.0

All installed with no problem - initialised QSonarr Series from disk (no problem) but the minute QSonarr starts processing (Scanning / RSS Sync) cpu usage spikes and memory usage climbs, to the point (>6GB) that I have to kill QSonarr to allow the NAS to continue operating !

I have been using QSonarr / QRadarr / QNZBGet for years without any issue so any insights would be greatly appreciated

[malve]

Is there a way to stop Appcenter from checking if there's a new version of QSonarr?
I mean I'm never going to update it in Appcenter anyway because of the builtin updater in QSonarr which is much quicker on releases.

[faaip]

*BUMP*

Apologies, but would love some guidance or suggestions here if anyone has any ideas?
Thanks in advance..

Hi there, I'm having issues with my install of QSonarr (configuration below).

Once a download completes (using SAB), QSonarr reports that it is "Unable to determine if file is a sample" for EVERY download.
Whilst I can perform a Manual Import, I would like to get this working... Does anyone have any suggestions, please?

System configuration notes:
NAS: TS-459
Firmware: 4.2.6
QMono: 5.4.1.6.0 (x86)
QSonarr: 2.0.0.5163 (x86) - updated in app to 2.0.0.5228
QSonarr - Status (warning): MediaInfo Library could not be loaded libmediainfo.so.0
QSonarr - Settings/Media Management/Permissions - both file and folder chmod are 0777
SABnzbdplus 180427 via SHERPA
SAB config: User Folders/Permissions for completed downloads: 777

Try installing this - fixed the error for me
https://www.qnapclub.eu/en/qpkg/712

so weirdly enough since the last qsonarr update im getting this error message too, but unfortunately downloading and installing that package didnt help - is there some kind of symlink breakage going on?

[timag3]

...

so weirdly enough since the last qsonarr update im getting this error message too, but unfortunately downloading and installing that package didnt help - is there some kind of symlink breakage going on?

I am having the exact same issue. I've tried installing that package. I did check that the libmediainfo files are in the PATH and can be found. Both Radarr and QSonar give me this error.

QSonar version
2.0.0.5338
Mono Version
5.20.1.19

[QNAP_Stephane]

updated

[Philbyfish73]

I am still getting the "MediaInfo Library could not be loaded libmediainfo.so.0" error and I have installed the updated release?

Also started getting RAM disk errors which i wasn't before. unsure if they are related?

Sonarr Version
2.0.0.5338
Mono Version
5.20.1.19
MediCLI version
18.12.1 (installed 5/2/20)