So, my little 563 workhorse is now sitting here all alone with a zero load...
SO LETS PUT QUAI ON IT!!!
First, comments I don't need from you: "This is not supported hardware.", "The 563 does not support...", "ZOMG!!! YOU HAXXOR!!!"
SO, I bought a supported card:
ASUS Geforce GTX 1050 Ti 4GB Phoenix Fan Edition DVI-D HDMI DP 1.4 Gaming Graphics Card (PH-GTX1050TI-4G) Graphic Cards
The power connector on the motherboard blocks the install of the GPU by a measely 6mm. So I have a PCIe extension on it.
Components not in TS-563 app center, so manual install of:
QuAI_0.9.1.67_x86_64.zip
NVIDIA_GPU_DRV_1.2.180625_x86_64.zip
Both complete successfully.
I altered the nvidia init file faking the SUMMITRIDGE platform like so and rebooted:
Code: Select all
[~] # head -10 /share/CACHEDEV1_DATA/.qpkg/NVIDIA_GPU_DRV/NVIDIA_GPU_DRV.sh
#!/bin/sh
CONF=/etc/config/qpkg.conf
QPKG_NAME="NVIDIA_GPU_DRV"
QPKG_ROOT=`/sbin/getcfg $QPKG_NAME Install_Path -f ${CONF}`
DRIVER_ROOT=/opt/${QPKG_NAME}
APACHE_ROOT=/share/`/sbin/getcfg SHARE_DEF defWeb -d Qweb -f /etc/config/def_share.info`
GPUHAL_CMD_L=`gpuhal_app -l`
GPUHAL_CMD="gpuhal_app"
PLATFORM="Platform = X86_SUMMITRIDGE" #`cat /etc/platform.conf | grep "Platform"`
DATE_CMD=`cat /etc/default_config/uLinux.conf | grep "Build Number"`
QUAI runs, and actually passes all the tests. But Jupyterhub_0.9.2_x86_64.zip doesnt install correctly:
Code: Select all
[/share/CACHEDEV1_DATA/.qpkg] # cat Jupyterhub_install.log
[2018-10-01 05:01:39] NVIDIA gpu is exist
[2018-10-01 05:01:39] device_index=1
[2018-10-01 05:01:39] vendor_name=NVIDIA Corporation
[2018-10-01 05:01:39] device_name=GP107 [GeForce GTX 1050 Ti]
[2018-10-01 05:01:39] igpu_egpu=external
[2018-10-01 05:01:39] mode_support=7
[2018-10-01 05:01:39] gpu support QTS
[2018-10-01 05:01:40] active_status=4
[2018-10-01 05:01:40] real_status=0
[2018-10-01 05:01:40] driver_gpkg=NVIDIA_GPU_DRV
[2018-10-01 05:01:40] driver_installed=1
[2018-10-01 05:01:40] gpu status isn't QTS mode
[/share/CACHEDEV1_DATA/.qpkg] #
Modules:
Code: Select all
[~] # lsmod
Module Size Used by Tainted: P
xt_conntrack 3401 3
xt_ipvs 1899 0
ip_vs_rr 1511 0
ip_vs_ftp 4045 0
ip_vs 101308 6 xt_ipvs,ip_vs_rr,ip_vs_ftp
xt_nat 1977 5
xt_addrtype 2957 7
rfcomm 50263 0
ib_iser 38152 0
rdma_cm 41925 1 ib_iser
ib_cm 33299 1 rdma_cm
iw_cm 30404 1 rdma_cm
mlx5_ib 177935 0
mlx5_core 475991 1 mlx5_ib
mlx4_ib 174300 0
mlx4_core 283832 1 mlx4_ib
ib_core 185882 6 ib_iser,rdma_cm,ib_cm,iw_cm,mlx5_ib,mlx4_ib
mlx_compat 1497 9 ib_iser,rdma_cm,ib_cm,iw_cm,mlx5_ib,mlx5_core,mlx4_ib,mlx4_core,ib_core
iscsi_tcp 8942 0
libiscsi_tcp 12474 1 iscsi_tcp
libiscsi 38321 3 ib_iser,iscsi_tcp,libiscsi_tcp
scsi_transport_iscsi 66769 4 ib_iser,iscsi_tcp,libiscsi
iscsi_target_mod 254552 0
target_core_file 11860 0
target_core_iblock 9938 0
target_core_mod 392400 3 iscsi_target_mod,target_core_file,target_core_iblock
iscsi_target_qlog 2524 2 iscsi_target_mod
fbdisk 20441 0
xt_LOG 1807 0
ipt_MASQUERADE 1533 9
xt_REDIRECT 1742 0
nf_nat_redirect 1267 1 xt_REDIRECT
iptable_nat 1959 2
nf_nat_masquerade_ipv4 1865 1 ipt_MASQUERADE
nf_nat_ipv4 5147 1 iptable_nat
nf_nat 11914 5 ip_vs_ftp,xt_nat,nf_nat_redirect,nf_nat_masquerade_ipv4,nf_nat_ipv4
xt_policy 2522 0
ipvlan 13356 0
dummy 3159 0
br_netfilter 13236 0
bridge 80620 1 br_netfilter
stp 1693 1 bridge
bonding 114377 0
xt_mark 1317 8
xt_set 7738 6
ip_set_hash_net 25076 7
ip_set 27079 2 xt_set,ip_set_hash_net
xt_connmark 1821 2
8021q 17067 0
ipv6 317533 70 rdma_cm,ib_core,ipvlan,bridge,[permanent]
uvcvideo 73142 0
videobuf2_vmalloc 5094 1 uvcvideo
videobuf2_memops 2215 1 videobuf2_vmalloc
videobuf2_core 33372 1 uvcvideo
snd_usb_caiaq 39170 0
snd_usb_audio 139029 0
snd_usbmidi_lib 20836 1 snd_usb_audio
snd_seq_midi 5478 0
snd_rawmidi 18725 3 snd_usb_caiaq,snd_usbmidi_lib,snd_seq_midi
fnotify 27085 0
udf 77803 0
isofs 31658 0
sp5100_tco 5952 1
iTCO_wdt 5764 0
kcopy 17895 0
nvidia_uvm 600346 0
nvidia_modeset 841851 0
nvidia 13054176 2 nvidia_uvm,nvidia_modeset
vfio_pci 27672 0
vfio_virqfd 2165 1 vfio_pci
vfio_iommu_type1 8294 0
vfio 14991 2 vfio_pci,vfio_iommu_type1
ufsd 652732 0
jnl 27383 1 ufsd
pl2303 11696 0
usbserial 29013 1 pl2303
qm2_i2c 4415 0
intel_ips 11476 0
drbd 331130 2
flashcache 142820 1
dm_tier_hro_algo 14164 1
dm_thin_pool 157020 4 target_core_mod,dm_tier_hro_algo
dm_bio_prison 4372 1 dm_thin_pool
dm_persistent_data 49941 1 dm_thin_pool
hal_netlink 4853 0
k10temp 4830 0
igb 162846 0
e1000e 198727 0
mpt3sas 171290 0
mpt2sas 169679 0
scsi_transport_sas 24764 2 mpt3sas,mpt2sas
raid_class 3572 2 mpt3sas,mpt2sas
usb_storage 49870 0
xhci_pci 4650 0
xhci_hcd 135128 1 xhci_pci
usblp 12346 0
uhci_hcd 32595 0
ehci_pci 4359 0
ehci_hcd 60621 1 ehci_pci
[~] #
Let's see what insmod says:
Code: Select all
[~] # insmod /share/CACHEDEV1_DATA/.qpkg/NVIDIA_GPU_DRV/kernel_modules/2018032>
insmod: can't insert '/share/CACHEDEV1_DATA/.qpkg/NVIDIA_GPU_DRV/kernel_modules/20180327_4.3.4/X86_SUMMITRIDGE/nvidia-drm.ko': unknown symbol in module, or unknown parameter
I find this in dmesg:
Code: Select all
[17101.481534] nvidia_drm: Unknown symbol drm_atomic_clean_old_fb (err 0)
Here's my systems additional info:
Code: Select all
Linux NASFA86A9 4.2.8 #1 SMP Fri Sep 14 01:20:07 CST 2018 x86_64 GNU/Linux
Code: Select all
Model:TS-563
Current firmware version:4.3.5.0699
Date:2018/09/14
Code: Select all
[~] # gpuhal_app -l
1:NVIDIA Corporation:GP107 [GeForce GTX 1050 Ti]:external:7
[~] #
Code: Select all
[~] # gpuhal_app -L 1
temperature=27
usage=2
memory=0/4038
fan=0
power=[Unknown/75.00
[~] #
So, any QNAP Engineers that hang out here have any thoughts? The other nvidia modules, nvidia, nvidia_uvm, and nvidia_modeset install fine.