Qnapcloud My DDNS stopped work
-
- Starting out
- Posts: 21
- Joined: Thu May 14, 2009 2:51 am
Qnapcloud My DDNS stopped work
The service My DDNS in QnapCloud stopped work few days ago. There is the message "Failed to update myQNAPcloud" on the configuration page and a domain is not updated indeed.
When I click on Update button, domain *.myqnapcloud.com is updated without any problems. Of course, that service has not sense if I have to update it manually
What was changed in my Qnap (TS-251) in the last days? I upgraded RAM from 2 to 8 GB and I installed Container Station and Browser Station. That's all.
Do you have any idea, what should I check, why DDNS doesn't work automatically?
m@k
When I click on Update button, domain *.myqnapcloud.com is updated without any problems. Of course, that service has not sense if I have to update it manually
What was changed in my Qnap (TS-251) in the last days? I upgraded RAM from 2 to 8 GB and I installed Container Station and Browser Station. That's all.
Do you have any idea, what should I check, why DDNS doesn't work automatically?
m@k
-
- Starting out
- Posts: 21
- Joined: Thu May 14, 2009 2:51 am
Re: Qnapcloud My DDNS stopped work
Today the same... see attached screenshots.
You do not have the required permissions to view the files attached to this post.
-
- Starting out
- Posts: 21
- Joined: Thu May 14, 2009 2:51 am
Re: Qnapcloud My DDNS stopped work
The Qnap support helped to solve the problem. They recommended to reset network configuration with following commands
m@k
Code: Select all
# /mnt/ext/opt/netmgr/netmgr.sh reset_all_settings_to_default
# /etc/init.d/network.sh reset_network_config_to_default
# /etc/init.d/network.sh clean-restart
-
- New here
- Posts: 2
- Joined: Thu Mar 28, 2013 8:28 pm
- Location: Australia
Re: Qnapcloud My DDNS stopped work
Hi, I have the same problem, it works for a while but does not update automatically to a new IP if it changes on my router/ISP.
- if i'm inside the LAN at the server and i press the "Update" button in QTS then it updates (but that's not much help if i'm remote)
thank you - i will try the commands to see if that helps
Regards
Steven
QTS 4.3.4.0516
TS-470 Pro
- if i'm inside the LAN at the server and i press the "Update" button in QTS then it updates (but that's not much help if i'm remote)
thank you - i will try the commands to see if that helps
Regards
Steven
QTS 4.3.4.0516
TS-470 Pro
-
- Starting out
- Posts: 22
- Joined: Tue Sep 25, 2018 12:15 pm
Re: Qnapcloud My DDNS stopped work
Suddenly I am having the same issue, warning almost every 10 minutes, "[Network & Virtual Switch] Failed to update DDNS "myQNAPcloud".
Checked Network & Virtual Switch and seems everything, inside or outside, LAN, works ok. Very annoying.
Checked Network & Virtual Switch and seems everything, inside or outside, LAN, works ok. Very annoying.
-
- New here
- Posts: 4
- Joined: Sat Oct 07, 2017 4:36 am
Re: Qnapcloud My DDNS stopped work
Same issue today after 4.3.5 firmware update.
-
- New here
- Posts: 3
- Joined: Thu Nov 30, 2017 11:51 pm
Re: Qnapcloud My DDNS stopped work
Same issue also with update to 4.3.5
-
- Starting out
- Posts: 25
- Joined: Sat Apr 10, 2010 6:28 am
Re: Qnapcloud My DDNS stopped work
also for me not work....with 4.3.5
Any solution?
Any solution?
-
- New here
- Posts: 5
- Joined: Sat Dec 17, 2016 1:43 am
Re: Qnapcloud My DDNS stopped work
I was having the same issue since upgrading to 4.3.5 this evening.
With the MyQNAPCloud app in App Center, I get the message "MyQNAPCloud cannot start because of incorrect information in its configuration file". There are no options for editing that file. I removed that app and just updated all of the DDNS settings from Network & Virtual Switch. I get green checkmarks for the router, cloudlink and ddns options. I think that cleared up the warning messages. It's 20+ minutes since the last message and I was getting new ones every 10 minutes.
With the MyQNAPCloud app in App Center, I get the message "MyQNAPCloud cannot start because of incorrect information in its configuration file". There are no options for editing that file. I removed that app and just updated all of the DDNS settings from Network & Virtual Switch. I get green checkmarks for the router, cloudlink and ddns options. I think that cleared up the warning messages. It's 20+ minutes since the last message and I was getting new ones every 10 minutes.
-
- Starting out
- Posts: 25
- Joined: Sat Apr 10, 2010 6:28 am
Re: Qnapcloud My DDNS stopped work
QNAP creates too many problems with updates and I'm thinking about changing with another brand
-
- First post
- Posts: 1
- Joined: Wed Mar 09, 2016 7:07 am
Re: Qnapcloud My DDNS stopped work
You can stop this push notification under the new "Notification Centre". Go to "System Notification Rules" --> in the Action column choose edit/change --> Untick the Warning checkbox and Confirm.
Hope that helps.
Hope that helps.
-
- Starting out
- Posts: 17
- Joined: Thu Feb 25, 2016 3:34 am
Re: Qnapcloud My DDNS stopped work
Im having the same issue too, almost every ten mins.
Along with a load of other issues since the update, like:
little robot dude has gone (i found him helpful)
Hybrid back up cant connect to sharefile anymore
apps have dissapeared off the desktop
Ive emailed support for help, so if i get a work around or fix i will post it up here.
Ads
Along with a load of other issues since the update, like:
little robot dude has gone (i found him helpful)
Hybrid back up cant connect to sharefile anymore
apps have dissapeared off the desktop
Ive emailed support for help, so if i get a work around or fix i will post it up here.
Ads
-
- First post
- Posts: 1
- Joined: Thu Feb 15, 2018 11:15 am
Re: Qnapcloud My DDNS stopped work
I deleted the myQNAPcloud, installed the latest firmware (just saw it today), and restarted a couple of times. I then went to Network & Virtual Switches > DDNS and you will see myQNAPcloud. Click configure and check Auto Router Configuration. Mine now works.