qnap status light flashing green and red. Too much time for Booting
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
qnap status light flashing green and red. Too much time for Booting
Hi,
From today Morning, My Qnap Is Not working, first time it was showing HDD1 Error, Then i restart my Qnap again. after that was taking long time for startup.
After updating my system Recent updates NASF 17742 4.3.5(20181114), qnap status light flashing green and red and showing booting for long time.
From today Morning, My Qnap Is Not working, first time it was showing HDD1 Error, Then i restart my Qnap again. after that was taking long time for startup.
After updating my system Recent updates NASF 17742 4.3.5(20181114), qnap status light flashing green and red and showing booting for long time.
You do not have the required permissions to view the files attached to this post.
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
Re: qnap status light flashing green and red. Too much time for Booting
Pawan Semwal wrote: ↑Mon Dec 24, 2018 7:19 pm Hi,
From today Morning, My Qnap Is Not working, first time it was showing HDD1 Error, Then i restart my Qnap again. after that was taking long time for startup.
After updating my system Recent updates NASF 17742 4.3.5(20181114), qnap status light flashing green and red and showing booting for long time.
You do not have the required permissions to view the files attached to this post.
- dolbyman
- Guru
- Posts: 35275
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: qnap status light flashing green and red. Too much time for Booting
not much info given
so hdd1 had an error...is that a single drive? raid member? why did you restart the system?
so hdd1 had an error...is that a single drive? raid member? why did you restart the system?
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
Re: qnap status light flashing green and red. Too much time for Booting
HI,
Sorry for sort information given by me.
Actually from Last Monday morning, Qnap is Not functioning abnormally , there are 4 hdd in NAS Drive, one of them showing error red messages. after that i restart QNAP.
2 times it was again showing red light in HDD one,i power off by pressing power button for (1.5 s). And remove power code from Drive, Remove HDD one, just clean contact point of hdd, and reinsert it again, After i that start it again.
2 Times Status light showing RED And Green, i wait for three,four hours, status light is green, HDD 1 is showing green status,
But now QNAP is working very slow.
Please give your suggestion. should i go for resting device.
Thanks And Regards
Pawan Semwal
Sorry for sort information given by me.
Actually from Last Monday morning, Qnap is Not functioning abnormally , there are 4 hdd in NAS Drive, one of them showing error red messages. after that i restart QNAP.
2 times it was again showing red light in HDD one,i power off by pressing power button for (1.5 s). And remove power code from Drive, Remove HDD one, just clean contact point of hdd, and reinsert it again, After i that start it again.
2 Times Status light showing RED And Green, i wait for three,four hours, status light is green, HDD 1 is showing green status,
But now QNAP is working very slow.
Please give your suggestion. should i go for resting device.
Thanks And Regards
Pawan Semwal
You do not have the required permissions to view the files attached to this post.
Last edited by Pawan Semwal on Tue Dec 25, 2018 1:46 pm, edited 1 time in total.
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: qnap status light flashing green and red. Too much time for Booting
Is that a TS-469 Pro?
What make and model HDDs are installed?
edit: In one of the screenshots you’ve just added, you have a SMART warning. Exactly what warning is shown?
What make and model HDDs are installed?
edit: In one of the screenshots you’ve just added, you have a SMART warning. Exactly what warning is shown?
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
Re: qnap status light flashing green and red. Too much time for Booting
TS 453 PRo
With 4 * 2 TB of Segare NAS HDD.
With 4 * 2 TB of Segare NAS HDD.
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
Re: qnap status light flashing green and red. Too much time for Booting
You do not have the required permissions to view the files attached to this post.
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: qnap status light flashing green and red. Too much time for Booting
Your screenshot shows a 4TB drive.
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: qnap status light flashing green and red. Too much time for Booting
Click on the SMART information menu on the left.
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
Re: qnap status light flashing green and red. Too much time for Booting
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: qnap status light flashing green and red. Too much time for Booting
As mentioned, your screenshot shows a 4TB drive.
As you haven’t said what the SMART error is with that drive, I’m guessing the very high abnormal sector count will be an issue. You should replace that drive.
How are your drives configured? RAID? Single drives?
As you haven’t said what the SMART error is with that drive, I’m guessing the very high abnormal sector count will be an issue. You should replace that drive.
How are your drives configured? RAID? Single drives?
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
Re: qnap status light flashing green and red. Too much time for Booting
You do not have the required permissions to view the files attached to this post.
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: qnap status light flashing green and red. Too much time for Booting
No, click the menu item on the left where it says “SMART Information":
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
-
- Starting out
- Posts: 17
- Joined: Mon Dec 24, 2018 6:40 pm
Re: qnap status light flashing green and red. Too much time for Booting
Pawan Semwal wrote: ↑Tue Dec 25, 2018 2:46 pmQNAP is working very very slow.
Please wait i am sending SMRT information..
You do not have the required permissions to view the files attached to this post.