Hi all.
Recently bought and set up a TS-453B with 4x 6TB Seagate Ironwolf ST6000VN0033, which are listed as Ironwolf enabled by Seagate.
However, Ironwolf Health Management tab in the Disk Health utility shows "Ironwolf Health Management: Not Avaialble" for all 4 drives. Running the latest build of QTS (4.3.6). Search didn't product any results - help would be much appreciated!
IHM not available on 6TB Ironwolf
-
- Been there, done that
- Posts: 530
- Joined: Wed Apr 28, 2010 9:22 pm
Re: IHM not available on 6TB Ironwolf
My guess is you haven't run or scheduled the tests, like in this topic viewtopic.php?f=182&t=145431
1x TS251, 1x TS251D, 1x TS253
-
- New here
- Posts: 2
- Joined: Thu Jan 03, 2019 7:26 pm
Re: IHM not available on 6TB Ironwolf
That did help, thanks so much for the fast reply!
Almost looks silly now but really wasn't obvious to me at the time
Similarly to that other topic, I've got lots of high 'raw values' in SMART for all 4 disks, but I guess that's not an issue as long as overall status is healthy?
Almost looks silly now but really wasn't obvious to me at the time
Similarly to that other topic, I've got lots of high 'raw values' in SMART for all 4 disks, but I guess that's not an issue as long as overall status is healthy?
-
- Been there, done that
- Posts: 530
- Joined: Wed Apr 28, 2010 9:22 pm
Re: IHM not available on 6TB Ironwolf
Yep, that is my assumption as well.
1x TS251, 1x TS251D, 1x TS253