QWA-AC2600 review by Moogle
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QWA-AC2600 review by Moogle
oo then don't install ap station then, since not needed.
go to QTS > virtual network > interfaces > WIFI > select the wireless adapter (2.4ghz or 5ghz) and toggle to enable it, then connect it to the router.
your qnap should then be wirelessly connected to your router. so any device on the router network should be able to see the qnap. then you configure a fix ip for it on your router.
not sure but i think if you connect to the router via the wireless adapter, it pegs that a different lan ip than the wired ip. they are considered 2 separate things. so make sure your setting up a fixed ip for the wired adapter device.
well to access your QTS, you need to be able to access your QNAP. So probably best leave it wired until wireless is setup, before you remove the wired. and test that it works.
It's only the initial setup you need to do this.
go to QTS > virtual network > interfaces > WIFI > select the wireless adapter (2.4ghz or 5ghz) and toggle to enable it, then connect it to the router.
your qnap should then be wirelessly connected to your router. so any device on the router network should be able to see the qnap. then you configure a fix ip for it on your router.
not sure but i think if you connect to the router via the wireless adapter, it pegs that a different lan ip than the wired ip. they are considered 2 separate things. so make sure your setting up a fixed ip for the wired adapter device.
well to access your QTS, you need to be able to access your QNAP. So probably best leave it wired until wireless is setup, before you remove the wired. and test that it works.
It's only the initial setup you need to do this.
Last edited by Moogle Stiltzkin on Wed Feb 13, 2019 4:05 pm, edited 3 times in total.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
- afterdinnerspeaker
- Starting out
- Posts: 47
- Joined: Thu Oct 04, 2018 7:34 am
- Location: Calgary, Alberta Canada
Re: QWA-AC2600 review by Moogle
Hi again Moogle!
You mentioned, "go to QTS > virtual network > interfaces > WIFI > select the wireless adapter (2.4ghz or 5ghz) and toggle to enable it, then connect it to the router."
In QTS, I can't see "virtual network" as a choice to click on?
You mentioned, "go to QTS > virtual network > interfaces > WIFI > select the wireless adapter (2.4ghz or 5ghz) and toggle to enable it, then connect it to the router."
In QTS, I can't see "virtual network" as a choice to click on?
Last edited by afterdinnerspeaker on Wed Feb 13, 2019 4:08 pm, edited 1 time in total.
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QWA-AC2600 review by Moogle
just do it while its wired, try if that works. i only reminded you that the wired ip is not the same as the wireless ip (because the wired ethernet port and the wireless adapter are 2 different things and issued separate ips if i recall correctly). so set the fix ip for the wireless adapter.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
- afterdinnerspeaker
- Starting out
- Posts: 47
- Joined: Thu Oct 04, 2018 7:34 am
- Location: Calgary, Alberta Canada
Re: QWA-AC2600 review by Moogle
Thanks Moogle! I will try again.Moogle Stiltzkin wrote: ↑Wed Feb 13, 2019 4:06 pm just do it while its wired, try if that works. i only reminded you that the wired ip is not the same as the wireless ip (because the wired ethernet port and the wireless adapter are 2 different things and issued separate ips if i recall correctly). so set the fix ip for the wireless adapter.
And yes, during all my “tinkering”, I did notice separate ips for wired & wireless connections.
Wish me luck & thanks again,
Jerry
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QWA-AC2600 review by Moogle
gl :}
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- Guru
- Posts: 13192
- Joined: Sat Dec 29, 2007 1:39 am
- Location: Stockholm, Sweden (UTC+01:00)
Re: QWA-AC2600 review by Moogle
You don't need a wireless adapter in the Qnap for that.afterdinnerspeaker wrote: ↑Wed Feb 13, 2019 2:40 pm I actually don't want to do a wireless ap station, I just want to connect to my NAS wirelessly.
Just connect the NAS with a network cable to the same network that the AP is connected to and connect to NAS from both wired and wireless clients.
RAID have never ever been a replacement for backups. Without backups on a different system (preferably placed at another site), you will eventually lose data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!
- afterdinnerspeaker
- Starting out
- Posts: 47
- Joined: Thu Oct 04, 2018 7:34 am
- Location: Calgary, Alberta Canada
Re: QWA-AC2600 review by Moogle
Thank you for your input P3R!P3R wrote: ↑Wed Feb 13, 2019 7:46 pmYou don't need a wireless adapter in the Qnap for that.afterdinnerspeaker wrote: ↑Wed Feb 13, 2019 2:40 pm I actually don't want to do a wireless ap station, I just want to connect to my NAS wirelessly.
Just connect the NAS with a network cable to the same network that the AP is connected to and connect to NAS from both wired and wireless clients.
Originally, because of cabling difficulties (from my NAS to my router), I installed a QWA-AC2600 wireless adapter in each of my two TS-453Be NAS systems.
Unfortunately, I'm having too many difficulties trying to set up my NAS to connect wirelessly to my router especially with a "static" ip address.
Since your post, I've discovered a way to connect my NAS directly to my router which is what you suggested.
I'm currently completing setting up my first NAS (directly to router) which should finally solve my problems...hopefully!
Thanks again for your response,
Jerry
-
- New here
- Posts: 3
- Joined: Wed Mar 20, 2019 10:34 pm
Re: QWA-AC2600 review by Moogle
Hi,
I tried to connect my QNAP wirelessly to my home router using QWA-AC2600 but it keeps trining without connecting. I can use it as access point with wireless app without problems . Is there something I need to do before I connect to my home WiFi.
Please I need help.
Info.
QNAP TS-253B
QWA-AC2600
Latest firmware
I tried to connect my QNAP wirelessly to my home router using QWA-AC2600 but it keeps trining without connecting. I can use it as access point with wireless app without problems . Is there something I need to do before I connect to my home WiFi.
Please I need help.
Info.
QNAP TS-253B
QWA-AC2600
Latest firmware
You do not have the required permissions to view the files attached to this post.
-
- First post
- Posts: 1
- Joined: Mon Apr 01, 2019 9:44 am
Re: QWA-AC2600 review by Moogle
my desktop pc which is connected to the same router, is also on the same network. So how do i connect it to the qnap via the wireless?
- afterdinnerspeaker
- Starting out
- Posts: 47
- Joined: Thu Oct 04, 2018 7:34 am
- Location: Calgary, Alberta Canada
Re: QWA-AC2600 review by Moogle
Hi Moogle!
It's been a while since I reached out to you as "real life" intervened...lol.
I'm still struggling with setting up my QWA-AC2600.
My TS-453be is connected by cable to my Actiontec T3200M router (supplied by our internet provider) and I've used a fixed IP address.
I've installed "WirelessAP Station" and added two access points (QWA-AC2600-2.4G and QWA-AC2600-5G).
Both access points have the "buttons" on top grayed out and show the Status as "Activating" with a minus sign (-) in front.
Here's the way I entered the information for the QWA-AC2600-2.4G access points:
Display name: QWA-AC2600-2.4G
Model: QWA-AC2600 (already filled in)
Status: - Activating (never changes)
SSID: QWA-AC2600-2.4G
Encryption type: WPA2 (Recommended)
Password: used same password as my NAS
Frequency: 2.4G
Channel: Auto
Under "Connection details:" is the message "0 device(s) are connecting to this access point"
Moogle, I'm at my wits end having spent days "Googling"! I'm also embarrassed because I fear I've made a simple mistake somewhere along the line .
If you have some time in the next while, I would sincerely appreciate your help as I know you've successfully persevered and then solved QWA-AC2600 setup.
Many thanks,
Jerry
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QWA-AC2600 review by Moogle
sup buddyafterdinnerspeaker wrote: ↑Tue Apr 30, 2019 7:45 am
Hi Moogle!
It's been a while since I reached out to you as "real life" intervened...lol.
I'm still struggling with setting up my QWA-AC2600.
does this help? he especially says something important @ 2:53
https://www.youtube.com/watch?v=B-1sCrlTKos
https://www.qnap.com/solution/wirelessap-station/en/
that "Status: - Activating (never changes)" yes i did experience that before, but i forgot how exactly i fixed that. i think i just tinkered i got it working right at some point.
it's a bit hard to troubleshoot so i'll just explain the basics firstly.
1. you can use EITHER with wireless apstation (which effectively makes your wireless cards access points, for other things to connect to your qnap direct).
OR, without wireless apstation (meaning it's disabled or not installed), and instead, go to QTS, network & virtual switch > network > interfaces > Wifi. You can then enable the wireless adapter to use it to connect to ANOTHER AP.)
So you choose between these 2 options. you can't use both at the same time. It wouldn't allow me to if i recall.
2. during the setup process, it's best to leave the wired connection connected. only after wireless is tested working, then it should be fine to remove the wired ethernet. but if you're merely using the wireless as a failover, you can still keep using wired (this is what i do for my own setup). you already have a router there, so leaving it wired seems fine.
Last edited by Moogle Stiltzkin on Tue Apr 30, 2019 8:59 am, edited 2 times in total.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QWA-AC2600 review by Moogle
right now i'm using wireless ap, with 1 ap 5ghz setup.
so i enabled the 2.4ghz as well to test if that works. see it say activating. after a minute or so it successfully activates. so this worked for me
so having both the 2.4ghz and 5ghz aps activated same time on the qnap nas using a single wireless adapter installed, SHOULD work as you can see from my screenshot.
i suggest you create a ticket here
https://helpdesk.qnap.com/index.php?
they should be able to talk you through it, what exactly the issue is, that we may have overlooked.
i suspect the issue could be your configuration in the virtual network.
I had to create a new virtual switch that was dedicated for the wireless ap usage. i think this was what fixed the issue for me. this is my current setting in virtual network in my layout, the virtual switch 1 is used for the ethernet connection (wired). The virtual switch 4 i created is only used by the wireless adapter. I believe this part of the setup process was not clearly explained in the manual perhaps.
here i added more screenshots for my setting for creating virtual switch 4 as an example of what i got to work.
i couldn't figure out how to get the lease time to be permanent usually you would use a "0" to indicate permanancy, but it didn't work in this case.
so i enabled the 2.4ghz as well to test if that works. see it say activating. after a minute or so it successfully activates. so this worked for me
so having both the 2.4ghz and 5ghz aps activated same time on the qnap nas using a single wireless adapter installed, SHOULD work as you can see from my screenshot.
i suggest you create a ticket here
https://helpdesk.qnap.com/index.php?
they should be able to talk you through it, what exactly the issue is, that we may have overlooked.
i suspect the issue could be your configuration in the virtual network.
I had to create a new virtual switch that was dedicated for the wireless ap usage. i think this was what fixed the issue for me. this is my current setting in virtual network in my layout, the virtual switch 1 is used for the ethernet connection (wired). The virtual switch 4 i created is only used by the wireless adapter. I believe this part of the setup process was not clearly explained in the manual perhaps.
here i added more screenshots for my setting for creating virtual switch 4 as an example of what i got to work.
i couldn't figure out how to get the lease time to be permanent usually you would use a "0" to indicate permanancy, but it didn't work in this case.
You do not have the required permissions to view the files attached to this post.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QWA-AC2600 review by Moogle
here are some info in regards to virtual switches on the qnap
https://www.qnap.com/en/how-to/tutorial ... al-switch/
@29:30
https://www.youtube.com/watch?v=AM2DePFiDVQ
https://www.youtube.com/watch?v=oQwQKLIRivI
https://www.qnap.com/en/how-to/tutorial ... al-switch/
@29:30
https://www.youtube.com/watch?v=AM2DePFiDVQ
https://www.youtube.com/watch?v=oQwQKLIRivI
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QWA-AC2600 review by Moogle
hope that helps :}
now i go back to playing mtg arena, i just hit mythic this season playing control deck hehe
https://www.youtube.com/watch?v=b5W9t62t10I
now i go back to playing mtg arena, i just hit mythic this season playing control deck hehe
https://www.youtube.com/watch?v=b5W9t62t10I
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
- afterdinnerspeaker
- Starting out
- Posts: 47
- Joined: Thu Oct 04, 2018 7:34 am
- Location: Calgary, Alberta Canada
Re: QWA-AC2600 review by Moogle
Hi again Moogle!
I waited a while so as not to disturb your game, but here I am again my friend.
First, thank you for the screenshots which pointed me in the right direction.
Here is a screenshot of my Network & Virtual Switch "Overview":
Then I selected "Virtual Switch" from the left panel and clicked on "Add". This prompted me to select a mode so I selected "Basic Mode":
Then I selected the checkbox for "Adapter 1" but got the message shown here:
Since I didn't intend to change my IP address, I clicked on "No".
I then went back to the "mode selection" page and clicked on "Advanced Mode" instead.
I was intending to provide more screen shots for my attempts in "Advanced Mode" but there must be a limit.
So here I am again Moogle...going backward!
Cheers,
Jerry
I waited a while so as not to disturb your game, but here I am again my friend.
First, thank you for the screenshots which pointed me in the right direction.
Here is a screenshot of my Network & Virtual Switch "Overview":
Then I selected "Virtual Switch" from the left panel and clicked on "Add". This prompted me to select a mode so I selected "Basic Mode":
Then I selected the checkbox for "Adapter 1" but got the message shown here:
Since I didn't intend to change my IP address, I clicked on "No".
I then went back to the "mode selection" page and clicked on "Advanced Mode" instead.
I was intending to provide more screen shots for my attempts in "Advanced Mode" but there must be a limit.
So here I am again Moogle...going backward!
Cheers,
Jerry
You do not have the required permissions to view the files attached to this post.