Hi OneCD, been a while mate!
After functioning for a very long time, SAB stopped working after a reboot. I downloaded the latest sherpa, ran the install for SABnzbd and it resulted in this error message:
Code: Select all
[/share/Public] # ./sherpa.sh SABnzbd
sherpa.sh (190224)
[ done ] downloaded sherpa package list
[ done ] downloaded QPKG (SABnzbdplus_190205.qpkg)
[ proc ] updating Entware package list ...Collected errors:
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/idna-2.1-py2.7.egg-info/PKG-INFO failed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/idna-2.1-py2.7.egg-info/dependency_links.txt fail ed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/idna-2.1-py2.7.egg-info/top_level.txt failed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/idna-2.1-py2.7.egg-info/SOURCES.txt failed: No su ch file or directory.
* opkg_install_pkg: Failed to determine obsolete files from previously installed python-idna
* check_data_file_clashes: Package python-base wants to install file /opt/lib/libpython2.7.so
But that file is already provided by package * python-dev
* check_data_file_clashes: Package python-base wants to install file /opt/lib/libpython2.7.so.1.0
But that file is already provided by package * python-dev
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/pycparser-2.14-py2.7.egg-info/dependency_links.tx t failed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/pycparser-2.14-py2.7.egg-info/SOURCES.txt failed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/pycparser-2.14-py2.7.egg-info/PKG-INFO failed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/pycparser-2.14-py2.7.egg-info/top_level.txt faile d: No such file or directory.
Collected errors:
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/ipaddress-1.0.17-py2.7.egg-info/dependency_links. txt failed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/ipaddress-1.0.17-py2.7.egg-info/top_level.txt fai led: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/ipaddress-1.0.17-py2.7.egg-info/PKG-INFO failed: No such file or directory.
* remove_obsolesced_files: unlinking /opt/lib/python2.7/site-packages/ipaddress-1.0.17-py2.7.egg-info/SOURCES.txt faile d: No such file or directory.
[ done ] updated Entware package list
[ done ] 6 IPKGs (2MB) to be downloaded
[ done ] downloaded & installed 6 IPKGs (Python, Git and others)
[ fail ] Download & install failed (PIP modules) [1]
[ fail ] 'SABnzbdplus' install failed! [20]
* Please consider creating a new issue for this on GitHub:
https://github.com/OneCDOnly/sherpa/issues
* Alternatively, post on the QNAP NAS Community Forum:
https://forum.qnap.com/viewtopic.php?f=320&t=132373
* Remember to include a copy of your sherpa runtime debug log for analysis.
- To display the runtime debug log:
cat /share/Public/sherpa.debug.log
The debug logs:
Code: Select all
[ dbug ] (>>) <Init>
[ dbug ] (II) ======================================================================
[ dbug ] (**) SCRIPT: started: Sat Mar 16 21:57:56 CST 2019
[ dbug ] (**) SCRIPT: version: 190224
[ dbug ] (II) ----------------------------------------------------------------------
[ dbug ] (II) Markers: (**) detected, (II) information, (WW) warning, (LL) log file,
[ dbug ] (II) (EE) error, (==) processing, (--) done, (>>) f entry, (<<) f exit,
[ dbug ] (II) (vv) variable name & value, ($1) positional argument value.
[ dbug ] (II) ----------------------------------------------------------------------
[ dbug ] (**) NAS : model: TS-853A
[ dbug ] (**) NAS : firmware version: 4.3.6
[ dbug ] (**) NAS : firmware build: 20190308
[ dbug ] (**) NAS : kernel: 4.2.8 x86_64
[ dbug ] (**) NAS : OS uptime: 2 days
[ dbug ] (**) NAS : system load: 1 min=1.59, 5 min=1.46, 15 min=1.44
[ dbug ] (**) NAS : EUID: 0
[ dbug ] (**) NAS : default volume: /share/CACHEDEV1_DATA
[ dbug ] (**) NAS : $PATH: /opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr
[ dbug ] (**) NAS : /opt: /share/CACHEDEV1_DATA/.qpkg/Entware-3x
[ dbug ] (**) NAS : /share/Download: CACHEDEV1_DATA/Download
[ dbug ] (**) SCRIPT: user arguments: SABnzbd
[ dbug ] (**) SCRIPT: target app: SABnzbdplus
[ dbug ] (II) ----------------------------------------------------------------------
[ dbug ] (vv) $STEPHANE_QPKG_ARCH [x64]
[ dbug ] (vv) $PREF_ENTWARE [Entware-3x]
[ dbug ] (**) QPKG : Entware installer: std
[ proc ] downloading sherpa package list ...
[ done ] downloaded sherpa package list
[ dbug ] (<<) <Init> [0]
[ dbug ] (>>) <PauseDownloaders>
[ dbug ] (--) paused existing SABnzbd queue
[ dbug ] (<<) <PauseDownloaders> [0]
[ dbug ] (>>) <RemoveOther>
[ dbug ] (**) QPKG : 'Optware': not installed [250]
[ dbug ] (<<) <RemoveOther> [0]
[ dbug ] (>>) <DownloadQPKGs>
[ dbug ] (>>) <DownloadQPKG>
[ proc ] downloading QPKG (SABnzbdplus_190205.qpkg) ...
[ done ] downloaded QPKG (SABnzbdplus_190205.qpkg)
[ dbug ] (<<) <DownloadQPKG> [0]
[ dbug ] (<<) <DownloadQPKGs> [0]
[ dbug ] (>>) <InstallEntware>
[ dbug ] (--) adjusted $PATH
[ dbug ] (vv) $PATH [/opt/bin:/opt/sbin:/opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin]
[ dbug ] (>>) <PatchEntwareInit>
[ dbug ] (II) patch: do the "opt shuffle" - already done
[ dbug ] (<<) <PatchEntwareInit> [0]
[ dbug ] (<<) <InstallEntware> [0]
[ dbug ] (>>) <InstallExtras>
[ dbug ] (II) QPKG 'Par2' is already installed
[ dbug ] (II) QPKG 'Par2' is already enabled
[ dbug ] (>>) <InstallIPKGs>
[ dbug ] (>>) <UpdateEntware>
[ proc ] updating Entware package list ...
[ dbug ] (==) performing Entware-3x upgrade x 2 ...
[ done ] updated Entware package list
[ dbug ] (<<) <UpdateEntware> [0]
[ dbug ] (>>) <InstallIPKGBatch>
[ proc ] calculating number and size of IPKGs required ...
[ dbug ] (II) requested IPKGs: git git-http nano less ca-certificates python python-pip python-pyopenssl python-dev gcc unrar p7zip coreutils-nice ionice ffprobe python python-pip python-pyopenssl python-lxml
[ dbug ] (==) finding all IPKG dependencies ...
[ dbug ] (--) complete
[ dbug ] (II) found all IPKG dependencies in 11 iterations
[ dbug ] (==) excluding packages already installed ...
[ dbug ] (--) complete
[ dbug ] (II) IPKGs to download: coreutils coreutils-nice less libexslt libxslt python-lxml
[ dbug ] (==) calculating size of IPKGs to download ...
[ dbug ] (--) complete
[ dbug ] (vv) $IPKG_download_size [1961730]
[ done ] 6 IPKGs (2MB) to be downloaded
[ proc ] downloading & installing 6 IPKGs (Python, Git and others) ...
[ done ] downloaded & installed 6 IPKGs (Python, Git and others)
[ dbug ] (**) STAGE : elapsed time: 00h:00m:14s
[ dbug ] (<<) <InstallIPKGBatch> [0]
[ dbug ] (<<) <InstallIPKGs> [0]
[ dbug ] (>>) <InstallPIPs>
[ proc ] downloading & installing (PIP modules) ...
[ fail ] Download & install failed (PIP modules) [1]
[ dbug ] (LL) ----------------------------------------------------------------------
[ dbug ] (LL) /share/Public/sherpa.tmp/PIP_modules.install.log
[ dbug ] (LL) ----------------------------------------------------------------------
[ dbug ] (LL) Requirement already satisfied: setuptools in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-pac kages
[ dbug ] (LL) Requirement already satisfied: packaging>=16.8 in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/sit e-packages (from setuptools)
[ dbug ] (LL) Requirement already satisfied: appdirs>=1.4.0 in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site -packages (from setuptools)
[ dbug ] (LL) Requirement already satisfied: six>=1.6.0 in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-pac kages (from setuptools)
[ dbug ] (LL) Requirement already satisfied: pyparsing in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-pack ages (from packaging>=16.8->setuptools)
[ dbug ] (LL) You are using pip version 9.0.1, however version 19.0.3 is available.
[ dbug ] (LL) You should consider upgrading via the 'pip install --upgrade pip' command.
[ dbug ] (LL) Collecting sabyenc==3.3.5
[ dbug ] (LL) Downloading https://files.pythonhosted.org/packages/4f/30/a1a313ee4d9881cc5e119fcefb9f746df71f1b4fa6d3b53c c334799dbfd8/sabyenc-3.3.5.tar.gz
[ dbug ] (LL) Could not import setuptools which is required to install from a source distribution.
[ dbug ] (LL) Traceback (most recent call last):
[ dbug ] (LL) File "/opt/lib/python2.7/site-packages/pip/req/req_install.py", line 387, in setup_py
[ dbug ] (LL) File "/opt/lib/python2.7/site-packages/setuptools/__init__.py", line 14, in <module>
[ dbug ] (LL) File "/opt/lib/python2.7/site-packages/setuptools/dist.py", line 27, in <module>
[ dbug ] (LL) File "/opt/lib/python2.7/site-packages/setuptools/config.py", line 9, in <module>
[ dbug ] (LL) from setuptools.py26compat import import_module
[ dbug ] (LL) ImportError: No module named py26compat
[ dbug ] (LL)
[ dbug ] (LL) You are using pip version 9.0.1, however version 19.0.3 is available.
[ dbug ] (LL) You should consider upgrading via the 'pip install --upgrade pip' command.
[ dbug ] (LL) result=[1]
[ dbug ] (LL) ----------------------------------------------------------------------
[ dbug ] (<<) <InstallPIPs> [20]
[ dbug ] (<<) <InstallExtras> [20]
[ dbug ] (>>) <Cleanup>
[ dbug ] (--) resumed existing SABnzbd queue
[ dbug ] (<<) <Cleanup> [20]
[ dbug ] (>>) <DisplayResult>
[ fail ] 'SABnzbdplus' install failed! [20]
[ dbug ] (**) SCRIPT: finished: Sat Mar 16 22:02:59 CST 2019
[ dbug ] (**) SCRIPT: elapsed time: 00h:05m:03s
[ dbug ] (II) ======================================================================
[ dbug ] (<<) <DisplayResult> [20]
I then upgraded pip using: pip install --upgrade pip
Ran the install again, but failed with the following debug:
Code: Select all
[ dbug ] (>>) <Init>
[ dbug ] (II) ======================================================================
[ dbug ] (**) SCRIPT: started: Sat Mar 16 22:07:23 CST 2019
[ dbug ] (**) SCRIPT: version: 190224
[ dbug ] (II) ----------------------------------------------------------------------
[ dbug ] (II) Markers: (**) detected, (II) information, (WW) warning, (LL) log file,
[ dbug ] (II) (EE) error, (==) processing, (--) done, (>>) f entry, (<<) f exit,
[ dbug ] (II) (vv) variable name & value, ($1) positional argument value.
[ dbug ] (II) ----------------------------------------------------------------------
[ dbug ] (**) NAS : model: TS-853A
[ dbug ] (**) NAS : firmware version: 4.3.6
[ dbug ] (**) NAS : firmware build: 20190308
[ dbug ] (**) NAS : kernel: 4.2.8 x86_64
[ dbug ] (**) NAS : OS uptime: 2 days
[ dbug ] (**) NAS : system load: 1 min=1.50, 5 min=1.83, 15 min=1.70
[ dbug ] (**) NAS : EUID: 0
[ dbug ] (**) NAS : default volume: /share/CACHEDEV1_DATA
[ dbug ] (**) NAS : $PATH: /opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr
[ dbug ] (**) NAS : /opt: /share/CACHEDEV1_DATA/.qpkg/Entware-3x
[ dbug ] (**) NAS : /share/Download: CACHEDEV1_DATA/Download
[ dbug ] (**) SCRIPT: user arguments: SABnzbd
[ dbug ] (**) SCRIPT: target app: SABnzbdplus
[ dbug ] (II) ----------------------------------------------------------------------
[ dbug ] (vv) $STEPHANE_QPKG_ARCH [x64]
[ dbug ] (vv) $PREF_ENTWARE [Entware-3x]
[ dbug ] (**) QPKG : Entware installer: std
[ proc ] downloading sherpa package list ...
[ done ] downloaded sherpa package list
[ dbug ] (<<) <Init> [0]
[ dbug ] (>>) <PauseDownloaders>
[ dbug ] (--) paused existing SABnzbd queue
[ dbug ] (<<) <PauseDownloaders> [0]
[ dbug ] (>>) <RemoveOther>
[ dbug ] (**) QPKG : 'Optware': not installed [250]
[ dbug ] (<<) <RemoveOther> [0]
[ dbug ] (>>) <DownloadQPKGs>
[ dbug ] (>>) <DownloadQPKG>
[ dbug ] (II) existing QPKG checksum correct (SABnzbdplus_190205.qpkg)
[ dbug ] (<<) <DownloadQPKG> [0]
[ dbug ] (<<) <DownloadQPKGs> [0]
[ dbug ] (>>) <InstallEntware>
[ dbug ] (--) adjusted $PATH
[ dbug ] (vv) $PATH [/opt/bin:/opt/sbin:/opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin]
[ dbug ] (>>) <PatchEntwareInit>
[ dbug ] (II) patch: do the "opt shuffle" - already done
[ dbug ] (<<) <PatchEntwareInit> [0]
[ dbug ] (<<) <InstallEntware> [0]
[ dbug ] (>>) <InstallExtras>
[ dbug ] (II) QPKG 'Par2' is already installed
[ dbug ] (II) QPKG 'Par2' is already enabled
[ dbug ] (>>) <InstallIPKGs>
[ dbug ] (>>) <UpdateEntware>
[ dbug ] (II) Entware package list was updated less than 60 minutes ago
[ done ] Entware package list is up-to-date
[ dbug ] (<<) <UpdateEntware> [0]
[ dbug ] (>>) <InstallIPKGBatch>
[ proc ] calculating number and size of IPKGs required ...
[ dbug ] (II) requested IPKGs: git git-http nano less ca-certificates python python-pip python-pyopenssl python-dev gcc unrar p7zip coreutils-nice ionice ffprobe python python-pip python-pyopenssl python-lxml
[ dbug ] (==) finding all IPKG dependencies ...
[ dbug ] (--) complete
[ dbug ] (II) found all IPKG dependencies in 11 iterations
[ dbug ] (==) excluding packages already installed ...
[ dbug ] (--) complete
[ dbug ] (II) IPKGs to download:
[ dbug ] (vv) $IPKG_download_size [0]
[ done ] no IPKGs are required
[ dbug ] (<<) <InstallIPKGBatch> [0]
[ dbug ] (<<) <InstallIPKGs> [0]
[ dbug ] (>>) <InstallPIPs>
[ proc ] downloading & installing (PIP modules) ...
[ fail ] Download & install failed (PIP modules) [1]
[ dbug ] (LL) ----------------------------------------------------------------------
[ dbug ] (LL) /share/Public/sherpa.tmp/PIP_modules.install.log
[ dbug ] (LL) ----------------------------------------------------------------------
[ dbug ] (LL) DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.
[ dbug ] (LL) Requirement already satisfied: setuptools in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-packages (35.0.2)
[ dbug ] (LL) Requirement already satisfied: packaging>=16.8 in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-packages (from setuptools) (16.8)
[ dbug ] (LL) Requirement already satisfied: appdirs>=1.4.0 in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-packages (from setuptools) (1.4.3)
[ dbug ] (LL) Requirement already satisfied: six>=1.6.0 in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-packages (from setuptools) (1.11.0)
[ dbug ] (LL) Requirement already satisfied: pyparsing in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/lib/python2.7/site-packages (from packaging>=16.8->setuptools) (2.1.10)
[ dbug ] (LL) DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.
[ dbug ] (LL) Collecting sabyenc==3.3.5
[ dbug ] (LL) Using cached https://files.pythonhosted.org/packages/4f/30/a1a313ee4d9881cc5e119fcefb9f746df71f1b4fa6d3b53cc334799dbfd8/sabyenc-3.3.5.tar.gz
[ dbug ] (LL) Complete output from command python setup.py egg_info:
[ dbug ] (LL) Traceback (most recent call last):
[ dbug ] (LL) File "<string>", line 1, in <module>
[ dbug ] (LL) File "/opt/lib/python2.7/site-packages/setuptools/__init__.py", line 14, in <module>
[ dbug ] (LL) File "/opt/lib/python2.7/site-packages/setuptools/dist.py", line 27, in <module>
[ dbug ] (LL) File "/opt/lib/python2.7/site-packages/setuptools/config.py", line 9, in <module>
[ dbug ] (LL) from setuptools.py26compat import import_module
[ dbug ] (LL) ImportError: No module named py26compat
[ dbug ] (LL)
[ dbug ] (LL) ----------------------------------------
[ dbug ] (LL) Command "python setup.py egg_info" failed with error code 1 in /share/CACHEDEV1_DATA/.qpkg/Entware-3x/tmp/pip-install-Drp483/sabyenc/
[ dbug ] (LL) result=[1]
[ dbug ] (LL) ----------------------------------------------------------------------
[ dbug ] (<<) <InstallPIPs> [20]
[ dbug ] (<<) <InstallExtras> [20]
[ dbug ] (>>) <Cleanup>
[ dbug ] (--) resumed existing SABnzbd queue
[ dbug ] (<<) <Cleanup> [20]
[ dbug ] (>>) <DisplayResult>
[ fail ] 'SABnzbdplus' install failed! [20]
[ dbug ] (**) SCRIPT: finished: Sat Mar 16 22:07:30 CST 2019
[ dbug ] (**) SCRIPT: elapsed time: 00h:00m:07s
[ dbug ] (II) ======================================================================
[ dbug ] (<<) <DisplayResult> [20]
Do you have any suggestion of how I can resolve this? Thanks!