I want to setup a simple (2 IP cameras) surveillance system and I cannot easy find a turial. I want to use free-of-charge stuff which operates smoothly and simply
Where should I start? In the app center I see QVR Center / Guard / Pro (I think I have to pay for this) and finally the Surveillance Station
Please advise how to start or address me to a tutorial or wiki from Qnap
Firmware rev. 4.3.3
Thanks for your patience
[TS251+] Surveillance QVR tutorial
-
- Know my way around
- Posts: 103
- Joined: Fri Mar 17, 2017 12:12 am
[TS251+] Surveillance QVR tutorial
TS-531P Annapurna
-
- Starting out
- Posts: 31
- Joined: Fri Mar 23, 2018 1:13 pm
Re: [TS251+] Surveillance QVR tutorial
hi,
Just try QVR Pro, it is "FREE" for 8 channels recording.
QVRR Center is used for managing multiple QVR Pro, Surveillance Station or QVR 5.1 servers.
Get the user manual from the app center or the following link:
https://download.qnap.com/Surveillance/ ... Manual.zip
however, make sure your NAS meets the basic system requirements
https://www.qnap.com/solution/qvr-pro-official/en/
Just try QVR Pro, it is "FREE" for 8 channels recording.
QVRR Center is used for managing multiple QVR Pro, Surveillance Station or QVR 5.1 servers.
Get the user manual from the app center or the following link:
https://download.qnap.com/Surveillance/ ... Manual.zip
however, make sure your NAS meets the basic system requirements
https://www.qnap.com/solution/qvr-pro-official/en/
- andersoncheng
- Getting the hang of things
- Posts: 73
- Joined: Mon Dec 25, 2017 10:48 am
- Contact:
Re: [TS251+] Surveillance QVR tutorial
add QVR Pro FAQ for reference:
https://www.qnap.com/en/how-to/faq/qvr-pro
https://www.qnap.com/en/how-to/faq/qvr-pro
-
- Know my way around
- Posts: 103
- Joined: Fri Mar 17, 2017 12:12 am
Re: [TS251+] Surveillance QVR tutorial
OK thanks
I did some homework. I read the manual package but I'd like to get a step-by-step guide / tutorial / app note for setting up a system which records just whenever ther is motion in the camera range. I am trying to add an event but I get confused by the menu presented by QVR (rules, thresholds etc.)
I find the manual describes the menus very well but lacks of examples
I see both qvi and mp4 files are stored in the recording storage. How can I have just one formati?
Thanks for your help
I did some homework. I read the manual package but I'd like to get a step-by-step guide / tutorial / app note for setting up a system which records just whenever ther is motion in the camera range. I am trying to add an event but I get confused by the menu presented by QVR (rules, thresholds etc.)
I find the manual describes the menus very well but lacks of examples
I see both qvi and mp4 files are stored in the recording storage. How can I have just one formati?
Thanks for your help
TS-531P Annapurna
- andersoncheng
- Getting the hang of things
- Posts: 73
- Joined: Mon Dec 25, 2017 10:48 am
- Contact:
Re: [TS251+] Surveillance QVR tutorial
How to Begin Recording on Event Detection in QVR Pro
https://buildyoss.blogspot.com/2019/06/ ... event.html
https://buildyoss.blogspot.com/2019/06/ ... event.html
- spile
- Been there, done that
- Posts: 641
- Joined: Tue May 24, 2016 12:13 am