Model name TS-453 Pro
Firmware version 4.3.6.0776 Build 20181130
Total memory 2 GB (2 GB usable)
i've installed a 32 bit windows 7 because i wanted something not too old but have a low ram consumption since curently my NAS has only 2GB ram, thats why i went for a 32 bit OS.
The config i went by on the vm is single cpu, 1 gb ram, 20gb hdd.
I've worked with virtual machines under windows with virtual red hat 9 (long time ago) and widnows 2003 server and performance was good enough.
The issue im having is that after installing the OS and the Guest Tools the machine is friggin slow, but friggin like... **, level slow, hope host doesnt censore me xD (swearing necessary for dramatic purposes) i mean, 15 minutes reboot, at the virtualization station the machine cpu is sitting at 5-6% while inside the system the cpu is at 100% with just one web browser opened.
Is this to be expected? Should i've done something different? i'm a bit underwelmed tbh :c
TS-435pro and virtual CPU 100%
-
- Getting the hang of things
- Posts: 50
- Joined: Tue Jan 12, 2016 5:09 pm
- dolbyman
- Guru
- Posts: 35272
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-435pro and virtual CPU 100%
i run windows 10 eval vm(64bit) with 6gb ram assigned on my 951x .. just fine
remember you are assigning a low power celeron to a vm .. don't expect crazy performance
my base ram config was 2GB as well..and I dont think vm station would even start with less than 4GB
remember you are assigning a low power celeron to a vm .. don't expect crazy performance
my base ram config was 2GB as well..and I dont think vm station would even start with less than 4GB
-
- Getting the hang of things
- Posts: 50
- Joined: Tue Jan 12, 2016 5:09 pm
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: TS-435pro and virtual CPU 100%
Take a look inside windows to see what it is doing.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- Getting the hang of things
- Posts: 50
- Joined: Tue Jan 12, 2016 5:09 pm
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: TS-435pro and virtual CPU 100%
A sysadmin that doesn’t reveal all troubleshooting steps. Good luck figuring out the issue.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
- Toxic17
- Ask me anything
- Posts: 6477
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: TS-435pro and virtual CPU 100%
I'm pretty sure the memory requirements for the system needs more than 1.5GB when Virtualisation station is in use. the reason your NAS is at 100% is it is fighting for resources. put some more memory in your NAS.
when installing Virtualisation station I think it runs a check and tells you your minimum requirements like so:
when installing Virtualisation station I think it runs a check and tells you your minimum requirements like so:
You do not have the required permissions to view the files attached to this post.
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55