Hi all,
i try to connect my Reolink RLC-511 Cam with QVR Pro, the Cam is listed in Compability List: https://www.qnap.com/en/compatibility-q ... nd=Reolink
But in the QVR Pro App, this Cam isn't listed in the drop down Menu. Can someone check this issue?
I tryed it with the Surveilance Solution Software, there is the RLC-511 listed. But when i change the Camera Option from "ONVIF Camera" to "Reolink RLC-511", there is always a error message "Can't connect - wrong IP". But I checked the IP and it is correct.....
Have someone any ideas to resolve this issues?
Thanks in advance......
QVR Pro, Surveilance Solution and Reolink RLC-511
-
- First post
- Posts: 1
- Joined: Mon Apr 29, 2019 3:26 pm
-
- Know my way around
- Posts: 101
- Joined: Sun Jun 10, 2018 10:54 pm
Re: QVR Pro, Surveilance Solution and Reolink RLC-511
That's odd. I just checked my setup and the 511 is not listed as a choice either. Maybe the camera was just added to the list and will be included in an upcoming update? I would enter a support ticket to get an answer from QNAP.
On the wrong IP issue... on my Reolink cameras there are different "port" numbers for ONVIF and Reolink setups. When using the ONVIF profile, the port is 8000. When using the Reolink profile, the port is 80. Not sure if these are the same for your model number, but it's worth a try.
On the wrong IP issue... on my Reolink cameras there are different "port" numbers for ONVIF and Reolink setups. When using the ONVIF profile, the port is 8000. When using the Reolink profile, the port is 80. Not sure if these are the same for your model number, but it's worth a try.
-
- New here
- Posts: 4
- Joined: Sat Feb 27, 2010 4:51 am
Re: QVR Pro, Surveilance Solution and Reolink RLC-511
Hi
I have an other issue with the reolink 511
I use the onvif Because idd the reolink profile is not there
But i choose for motion detection the camera but qvr pro wont act in the motion and wont fire the events? How can i check if the motion detection works?
Help
Alex
I have an other issue with the reolink 511
I use the onvif Because idd the reolink profile is not there
But i choose for motion detection the camera but qvr pro wont act in the motion and wont fire the events? How can i check if the motion detection works?
Help
Alex
-
- Experience counts
- Posts: 2415
- Joined: Wed Jan 08, 2014 10:34 pm
Re: QVR Pro, Surveilance Solution and Reolink RLC-511
Not all ONVIF implementations support ONVIF event notifications, it was an optional part of the original specifications.But i choose for motion detection the camera but qvr pro wont act in the motion and wont fire the events? How can i check if the motion detection works
To check if your camera creates ONVIF event notifications for motion, you can query it with ONVIF Device Manager from sourceforge.net
Give ODM some logon credentials (top left of the window) and it will automatically find ONVIF devices on the same address range as the PC.
Take a look at what's in Rules and Analytics
Any events generated can be seen in the Events page.
TS-431+ for storage and media and a bunch of IP cams under Surveillance Station. TVS-473 as files backup and QVR Pro.