QTS 4.4.0.0931 build 20190510

[sharonhsieh]

QTS 4.4.0.0931 build 20190510

Download links:
https://download.qnap.com

/Storage/TS-X53D/TS-X53D_20190510-4.4.0.0931.zip
/Storage/TS-X72/TS-X72_20190510-4.4.0.0931.zip
/Storage/TS-X72U/TS-X72U_20190510-4.4.0.0931.zip
/Storage/TS-X88/TS-X88_20190510-4.4.0.0931.zip

Release note:

QTS 4.4.0.0931 build 20190510

[Important Notes]
- To learn more about NAS models that support the TR-004U/TR-004/TR-002, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion
- To use a TR-004/TR-002 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space.
- All NAS models supported by QTS 4.4.0 use Kernel 4.14.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php

[New Feature]
Storage Management
- Added support for storage modes and features on the TR-004U external RAID enclosure.

Network and Virtual Switch
- Added support for QNAP QNA-UC5G1T network adapters.
- Added support for deleting network adapter configurations.

Storage Management
- Added support for the QM2-2S10G1TA and QM2-2P10G1TA.

Expansion Card
- Added support for the QXG-10G2T-107 10GbE network expansion card.
- Added support for Mustang-F100 FPGA and Mustang-V100 VPU cards. You can go to Control Panel and assign them as resources for the OpenVINO™ Workflow Consolidation Tool.

[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage ＆ Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".n an TR-004 external RAID enclosure is connected to the NAS, changing the enclosure's RAID configuration using the hardware Mode switch might cause the status of its external RAID group or disks to change to "Error". To resolve this issue, update the enclosure firmware to the latest version.

[Fixed Issues]
- Fixed multiple vulnerabilities in Samba (CVE-2019-3880 & CVE-2019-3824).
- Fixed a vulnerability in OpenSSH (CVE-2018-15473).
- Users with certain usernames would be denied access to shared folders.