Hello,
I reasently installed the latest patch and the v5.1.3.3.5 on my Surveillance Station. I also run the QNAP 4.2.6 on a old Cisco NAS (TS-549). As cameras I use ONVIF from Aliexpress. Everything has worked as a charm untill last patch.
Under the video Settings, Im not able to see anything in the Resolution, Frame Rate and Quality and as an effect no recording.
I have tried to re-install the Surveillance App, but it seem to be picking up the existing configuration. Does anyone have experienced the same issue?
My appologies if this has been posted in a previous post - I think I have read them all but one never know =)
Thank you all in advance,
Kind Regars
BjørnK
Resolution, Frame Rate and quality parameters disappeared after patch
-
- First post
- Posts: 1
- Joined: Wed May 29, 2019 11:53 pm
-
- Starting out
- Posts: 17
- Joined: Wed Sep 20, 2017 5:37 am
Re: Resolution, Frame Rate and quality parameters disappeared after patch
I've had similar problems quite often and found the QVR Pro camera stream settings pages to be very buggy, especially if you're editing a camera instead of adding a new one. Often when editing it would pick up the wrong password from somewhere - presumably Chrome's cache, and I proved that by exporting the camera settings with passwords. I had this issue on earlier versions but I found the latest release a month or two ago was much better. I'm now currently running a beta version though to help investigate big memory leaks in the core QVRPro processes and haven't seen it too recently
-
- New here
- Posts: 4
- Joined: Sun Mar 17, 2013 1:50 am
Re: Resolution, Frame Rate and quality parameters disappeared after patch
I have the same problem with latest firmware!