I have four Dahua cameras and want to use QVR Pro for motion detection. After setting up two cameras and trying to set up a third I have just received a QVR Pro message saying " You have exceeded the number of cameras that QVR Pro can detect motion" This is just another issue in the use of QVR Pro that is annoying me. Another is the almost complete lack of advice concerning practical motion event settings.
Is the two camera motion detect limit a known issue?
Only two cameras for QVR Pro motion detect?
- Beemer2
- Easy as a breeze
- Posts: 331
- Joined: Sat Oct 17, 2015 12:22 am
- Location: Scotland
Only two cameras for QVR Pro motion detect?
TS-473A, 32GB, 4x4TB, Raid5, 12GB Red Plus backup
-
- New here
- Posts: 5
- Joined: Thu Jun 01, 2017 3:41 am
Re: Only two cameras for QVR Pro motion detect?
i have 5 camera on my 453, only on two can use this motion detection too. on another camera i must use motioin detection inside camera fw.
QNAP TVS-472XT 16GB, 2x480 SSD Patriot, 1x8TB wd - main
QNAP TS-453A 16GB 2x480 SSD Adata, 1x8TB -1. backup
QNAP TS-251 4GB 2x1.5TB - 2.backup
QNAP TR-004 4x3TB attached to 2. backup
QNAP QG-103N QGenie useless toy
QNAP TS-453A 16GB 2x480 SSD Adata, 1x8TB -1. backup
QNAP TS-251 4GB 2x1.5TB - 2.backup
QNAP TR-004 4x3TB attached to 2. backup
QNAP QG-103N QGenie useless toy
-
- Experience counts
- Posts: 2415
- Joined: Wed Jan 08, 2014 10:34 pm
Re: Only two cameras for QVR Pro motion detect?
It's a processing power limitation in the specific NAS that's handling the video analytics.Is the two camera motion detect limit a known issue?
Generally, the camera itself is much better at handling the motion and other event detection, and passing on the notifications to the NAS app for the configured action such as recording.
This is because the camera has a special-purpose DSP (digital signal processor) that does the video encoding and imaging analytics.
The NAS just has its CPU.
TS-431+ for storage and media and a bunch of IP cams under Surveillance Station. TVS-473 as files backup and QVR Pro.
- Beemer2
- Easy as a breeze
- Posts: 331
- Joined: Sat Oct 17, 2015 12:22 am
- Location: Scotland
Re: Only two cameras for QVR Pro motion detect?
My thanks to you all for explaining this.
Ian
Ian
TS-473A, 32GB, 4x4TB, Raid5, 12GB Red Plus backup