Hi all
Hope someone can give me some advise what I can do.
I installed the latest Firmware as prompted by the System. After the reboot the NAS Stück and is only flashing red/green. The HDD Led are off and only the network LED shows some activity. But the NAS is not online and can’t be found by the Qfinder.
I figured that the Firmware update failed and I tried the recovery as described in the Wiki. But I struggle to reset the NAS. It doesn’t respond to the Reset button. When I plugin the plug it boots up but only the LED is flashing red/green.
I’m out of ideas. Help is much appreciated..
Thanks
Robert
NAS down after Firmware update TS-219P
-
- First post
- Posts: 1
- Joined: Sun Aug 18, 2019 1:32 am
- spikemixture
- Been there, done that
- Posts: 890
- Joined: Wed Mar 07, 2018 11:04 pm
- Location: 3rd World
Re: NAS down after Firmware update TS-219P
I did the update last night also but on a TVS-1282.
Mine got stuck on checking bios memory ( or similar)
I have a LED screen.
After 15 minutes I just turned it off from the front button.
It came back and I now have the latest firmware and all is good
Mine got stuck on checking bios memory ( or similar)
I have a LED screen.
After 15 minutes I just turned it off from the front button.
It came back and I now have the latest firmware and all is good
Qnap TS-1277 1700 (48gb RAM) 8x10TB WD White,- Raid5, 2x M.2 Crucial 1TB (Raid 1 VM),
2x SSD 860 EVO 500gb (Raid1 QTS), 2x SSD 860 EVO 250GB (Cache), 2x M.2 PCIe 970 500gb NVME (Raid1 Plex and Emby server)
GTX 1050 TI
Qnap TVS-1282 i7 (32GB RAM) 6x8TB WD White - JBOD, 2x M.2 Crucial 500gb (Raid1 VM),
2x SSD EVO 500gb (Raid1 QTS), 2x SSD EVO 250gb (Raid1 Cache), 2x M.2 PCIe Intel 512GB NVME (Raid1-Servers)
Synology -1817+ - DOA
Drobo 5n - 5x4TB Seagate, - Drobo Raid = 15TB
ProBox 8 Bay USB3 - 49TB mixed drives - JBOD
All software is updated asap.
I give my opinion from my experience i.e. I have (or had) that piece of equipment/software and used it!
2x SSD 860 EVO 500gb (Raid1 QTS), 2x SSD 860 EVO 250GB (Cache), 2x M.2 PCIe 970 500gb NVME (Raid1 Plex and Emby server)
GTX 1050 TI
Qnap TVS-1282 i7 (32GB RAM) 6x8TB WD White - JBOD, 2x M.2 Crucial 500gb (Raid1 VM),
2x SSD EVO 500gb (Raid1 QTS), 2x SSD EVO 250gb (Raid1 Cache), 2x M.2 PCIe Intel 512GB NVME (Raid1-Servers)
Synology -1817+ - DOA
Drobo 5n - 5x4TB Seagate, - Drobo Raid = 15TB
ProBox 8 Bay USB3 - 49TB mixed drives - JBOD
All software is updated asap.
I give my opinion from my experience i.e. I have (or had) that piece of equipment/software and used it!