I have a TVS-473e and need to install a 3.1 USB PCIe card. It looks as though I need to remove the power unit before I can get access to the mounting screws. Before I risk unscrewing the wrong parts (I think the power plug and other bits are in the same screw array) has anyone seen an instruction on how to remove the power unit?
Thanks
PCIe installation in 473
-
dolbyman
- Guru
- Posts: 35275
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: PCIe installation in 473
https://us1.qnap.com/Storage/TechnicalD ... -01-en.pdf
starting page 24
make sure you check the compatibility list for the correct cards supported, as the 4 bay unit has a lot less space between power supply and brackets then the 6 or 8 bay variants
https://www.qnap.com/en/compatibility/? ... ategory=11
starting page 24
make sure you check the compatibility list for the correct cards supported, as the 4 bay unit has a lot less space between power supply and brackets then the 6 or 8 bay variants
https://www.qnap.com/en/compatibility/? ... ategory=11