TR-002 Constant Drive Access Even When Idle?

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
fatpizza
Starting out
Posts: 21
Joined: Tue May 06, 2014 10:38 am

TR-002 Constant Drive Access Even When Idle?

Post by fatpizza » Tue Aug 06, 2019 12:14 pm

I recently bought a QNAP TR-002 external USB enclosure, and I installed two seagate ironwolf 12tb drives in it yesterday. I have it connected to my QNAP 1277 via USB-C in software mode (setup as Raid 1 within the 1277 interface).
It seems to work fine, but even when I'm not using it the disks sound like their heads are seeking pretty much every second or two, and the noise is unbearably annoying (the HDD lights flash on the unit as well). I have drives set to standby after 30 minutes but that makes zero difference. I have 8x 10TB WD Reds inside the 1277 and that is ultra quiet.
I've tried stopping a bunch of apps including the virtualization station with no change.

Any ideas? As it's unusable as far as I'm concerned.

P3R
Guru
Posts: 11324
Joined: Sat Dec 29, 2007 1:39 am
Location: Stockholm, Sweden (UTC+01:00)

Re: TR-002 Constant Drive Access Even When Idle?

Post by P3R » Wed Aug 07, 2019 9:09 pm

Maybe it's the Ironwolf Health Management (IHM) that's working on the disks?

In addition to the above I would expect 7200 rpm disks in a small 2-bay chassis to be much noisier than 5400 rpm in a large metal case NAS.
RAID have never ever been a replacement for backups. Without backups on a different system (preferably placed at another site), you will eventually lose data!

A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.

All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!

User avatar
QNAPJason
QNAP Staff
Posts: 5397
Joined: Thu May 21, 2009 2:14 pm
Location: Taipei

Re: TR-002 Constant Drive Access Even When Idle?

Post by QNAPJason » Thu Sep 05, 2019 6:03 pm

Hi fatpizza,
We are working on the TR-004/002/004U idle mode when connecting to QTS 4.4.1.
Please wait for the new official release or try the beta 4 https://www.qnap.com/en/download?model= ... y=firmware.

Post Reply

Return to “System & Disk Volume Management”