Hi Experts,
All of a sudden by bay2 drive got failed and NAS went to degraded mode.
Now when I put a similar new disk back, NAS does not see the drive.
the HDD2 light constant Red.
Any tips?
Appreciate your comments.
Thanks
Shiba
Model: TS 251+
RAID 1
DISK2 failed, New Drive not recognized(TS 251+)
-
- New here
- Posts: 2
- Joined: Wed Dec 16, 2015 1:34 am
- dolbyman
- Guru
- Posts: 35272
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: DISK2 failed, New Drive not recognized(TS 251+)
did you try to reboot the nas degaraded and then swap the drive in ?
does the disk show up in disk view ? (smart)
if not you might have a broken backplane
does the disk show up in disk view ? (smart)
if not you might have a broken backplane
Last edited by dolbyman on Sat Sep 14, 2019 2:00 pm, edited 1 time in total.
-
- New here
- Posts: 2
- Joined: Wed Dec 16, 2015 1:34 am
Re: DISK2 failed, New Drive not recognized(TS 251+)
Yes. I did reboot and the disk2 does not show up in disk view.
If it is a broken backplane, then is there a way to reconfigure the Raid 1 with one disk?
Not sure how much cost would be to fix or even it is worth of doing the same.
Thanks
If it is a broken backplane, then is there a way to reconfigure the Raid 1 with one disk?
Not sure how much cost would be to fix or even it is worth of doing the same.
Thanks
- dolbyman
- Guru
- Posts: 35272
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: DISK2 failed, New Drive not recognized(TS 251+)
doesnt really matter if single drive or degraded raid1 (besides the warning that it is degraded)
repair costs would need to be inquired with qnap ... (open a support ticket with them)
repair costs would need to be inquired with qnap ... (open a support ticket with them)