Citrix NetScaler VPX on VS3
-
- New here
- Posts: 4
- Joined: Fri Jun 21, 2019 7:09 am
Citrix NetScaler VPX on VS3
I was wondering if anyone has got this working? I have managed to copy over the KVM download to VS and renamed the file .img. When the VM boots it just hangs at "Loading /boot/defaults/loader.conf". I know its not officially supported by Citrix/QNAP, but as VS is KVM i thought this would work with minimal fuss .
-
- New here
- Posts: 4
- Joined: Fri Jun 21, 2019 7:09 am
Re: Citrix NetScaler VPX on VS3
Incase this is useful for anyone else. I got it working by doing the following:-
- install VMWare Workstation (Trial is fine) on a PC
- import the VMware Citrix OVF to VMWare Workstation
- export the VM from VMWare Workstation
- import the exported VM to the QNAP
- modify the network card to be VIRTIO (if you don't do this the booting will fail due to no network card)
- install VMWare Workstation (Trial is fine) on a PC
- import the VMware Citrix OVF to VMWare Workstation
- export the VM from VMWare Workstation
- import the exported VM to the QNAP
- modify the network card to be VIRTIO (if you don't do this the booting will fail due to no network card)
-
- First post
- Posts: 1
- Joined: Tue Nov 12, 2019 3:28 pm
Re: Citrix NetScaler VPX on VS3
NetScaler VPX VM requires a serial port to power on the VM successfully.
By default, the guest VM on AHV does not come with a serial port.
(Reference document: https://support.citrix.com/article/CTX233303)
Citrix ADC VPX needs a serial port to boot.
Workaround:
Modify /boot/defaults/loader.conf
(/flash/boot/loader.conf)
find the line with console="vidconsole,comconsole"
remove comconsole from the console option.
Mine loader.conf content from ADC VPX on QKVM :
Remember to modify the loader.conf file each time you upgrade/downgrade NS firmware.
Use CLI to update the NS firmware & do not reboot immediately after running /var/nsinstall/build_<targetbuildnumber>/installns
By default, the guest VM on AHV does not come with a serial port.
(Reference document: https://support.citrix.com/article/CTX233303)
Citrix ADC VPX needs a serial port to boot.
Workaround:
Modify /boot/defaults/loader.conf
(/flash/boot/loader.conf)
find the line with console="vidconsole,comconsole"
remove comconsole from the console option.
Mine loader.conf content from ADC VPX on QKVM :
Code: Select all
autoboot_delay=3
boot_verbose=1
kernel="/ns-12.1-55.13"
vfs.root.mountfrom="ufs:/dev/md0c"
console="vidconsole"
Use CLI to update the NS firmware & do not reboot immediately after running /var/nsinstall/build_<targetbuildnumber>/installns
-
- Starting out
- Posts: 20
- Joined: Mon Dec 08, 2014 5:24 pm
Re: Citrix NetScaler VPX on VS3
Awesome info, thank you!