Wake on Lan through Google Assistant

[maxs84]

Hello to all,
recently they gave me a google nest mini and I started to discover its features / utilities.
I discovered that there is an online service called IFTTT that allows you to connect various devices that do not natively interface.
Among the many services available on IFTTT there is also "google assistant" and "qnap" but unfortunately natively through voice commands you can only:
- turn off in nas
- free the nas
- restart the nas
but unfortunately there is no Wake on Lan (WOL).

Searching online I saw that it would be possible to start a host remotely via a url using the services offered by:
www.wakeonlan.me
www.depicus.com

Unfortunately, however, I can't get them to work and I don't understand why.

If I could start the nas through these sites I could, through IFTTT and Webhooks, launch the url via voice command and then start the nas with your voice.

Anyone have any ideas?

[dolbyman]

wol has to be done within your own lan ..so a machine inside your home has to send the magic packet

[maxs84]

If i use an app on my iphone or mac wol work properly but if i try to launch magic packet from internet service like depicus the nas does't wake up

[dolbyman]

as said

you need to be in your own network...magic packets will not traverse nat (obviously)

[maxs84]

Sorry but my english is bad!
I know that i need to be in my network to send a magic packet but i reed that there is a solution to send a magic packet from internt...
the promeblem is open by arp the router port.

[dolbyman]

look at projects like this

https://www.instructables.com/id/Raspbe ... AN-Server/

[maxs84]

Thaks you very much but i found another solution: rm mini 3 (smart ir remote).

[jarboloide]

Here are the few steps:

IFTTT - Create a applet Google Assistant
"Say a simple phrase" and choose the wake up sentence, for example "Turn on PC"

use "make a web request"from webhook service with the following parameters:

url: on depicus domain use /wake-on-lan/woli-ajax.php
method: POST
content type: application/x-www-form-urlencoded
bodu: macadderss=XX-XX-XX-XX-XX-XX&ip=your-ip.com&subnet=1&port=9&secureon=

And that's it!

Allow port on your router to you PC IP Lan (something like 192.168.1.XXX

[San505]

Maxs84. Hi. How did you manage to do make on lan from rm mini 3? Could you share some tutorial?