[QSonarr] [2.0.0.5338] Smart PVR for newsgroup and bittorrent users
-
- Starting out
- Posts: 33
- Joined: Fri Dec 02, 2011 5:58 pm
- Location: Queensland, Australia
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
I'll install that now and see if it helps. I'm not sure how this happened however Sonarr and Sabnzbd seemed to be trying to run on the same port. Sorted it out eventually but I can't figure out why Sonarr shows the startup port as 8800 when that is the port for Sabnzbd.
You do not have the required permissions to view the files attached to this post.
- Skeptical.me
- Easy as a breeze
- Posts: 428
- Joined: Sun Jun 05, 2016 8:58 am
- Location: Australia
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
If I had the answer I'd give it to you, I'm baffled as to why that is occurring. And also I use NZBGet.CamTheSnapper wrote:I'll install that now and see if it helps. I'm not sure how this happened however Sonarr and Sabnzbd seemed to be trying to run on the same port. Sorted it out eventually but I can't figure out why Sonarr shows the startup port as 8800 when that is the port for Sabnzbd.
QNAP TS-253Be 2 x WD Red 6TB RAID1, & 1 x WD Ext. 6TB, QTS: 4.5.3.1670
Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Container Station
Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Container Station
- Skeptical.me
- Easy as a breeze
- Posts: 428
- Joined: Sun Jun 05, 2016 8:58 am
- Location: Australia
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
CamTheSnapper wrote:I'll install that now and see if it helps. I'm not sure how this happened however Sonarr and Sabnzbd seemed to be trying to run on the same port. Sorted it out eventually but I can't figure out why Sonarr shows the startup port as 8800 when that is the port for Sabnzbd.
Mine has always shown port 8989
You do not have the required permissions to view the files attached to this post.
QNAP TS-253Be 2 x WD Red 6TB RAID1, & 1 x WD Ext. 6TB, QTS: 4.5.3.1670
Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Container Station
Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Container Station
-
- First post
- Posts: 1
- Joined: Mon Nov 19, 2018 8:30 am
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
Hey All,
I keep getting errors in relation to - : Syntax Error after '<!' characters.
I've done a quick google and it points to Qmono being out of date.
Issue is I can't get the latest to run on my nas, it is a bit older TS-559 Pro+. I keep getting an error pointing issues with the libm.so.6 architecture.
When Qmono "Qmono_5.14.0.177_x86_64.qpkg" is installed, it will not boot.
[~] # /opt/Qmono/bin/mono --version
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32
[~] # /share/MD0_DATA/.qpkg/Qmono/Qmono.sh start
/share/MD0_DATA/.qpkg/Qmono/Qmono.sh: line 24: /usr/share/.mono: is a directory
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32
When "Qmono_3.10.0.0_x86.qpkg" is installed it boots fine.
[~] # /opt/Qmono/bin/mono --version
Mono JIT compiler version 3.10.0 (tarball Fri Apr 24 14:18:37 EDT 2015)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: altstack
Notifications: epoll
Architecture: x86
Disabled: none
Misc: softdebug
LLVM: supported, not enabled.
GC: sgen
[~] # uname -a
Linux NAS 3.4.6 #1 SMP Fri Oct 26 12:47:07 CST 2018 x86_64 unknown
I can see a few people have run into this, I've done a ton of googling but am stumped on this one.
Any ideas?
I keep getting errors in relation to - : Syntax Error after '<!' characters.
I've done a quick google and it points to Qmono being out of date.
Issue is I can't get the latest to run on my nas, it is a bit older TS-559 Pro+. I keep getting an error pointing issues with the libm.so.6 architecture.
When Qmono "Qmono_5.14.0.177_x86_64.qpkg" is installed, it will not boot.
[~] # /opt/Qmono/bin/mono --version
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32
[~] # /share/MD0_DATA/.qpkg/Qmono/Qmono.sh start
/share/MD0_DATA/.qpkg/Qmono/Qmono.sh: line 24: /usr/share/.mono: is a directory
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32
When "Qmono_3.10.0.0_x86.qpkg" is installed it boots fine.
[~] # /opt/Qmono/bin/mono --version
Mono JIT compiler version 3.10.0 (tarball Fri Apr 24 14:18:37 EDT 2015)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: altstack
Notifications: epoll
Architecture: x86
Disabled: none
Misc: softdebug
LLVM: supported, not enabled.
GC: sgen
[~] # uname -a
Linux NAS 3.4.6 #1 SMP Fri Oct 26 12:47:07 CST 2018 x86_64 unknown
I can see a few people have run into this, I've done a ton of googling but am stumped on this one.
Any ideas?
-
- Know my way around
- Posts: 107
- Joined: Wed Apr 15, 2015 9:08 pm
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
My Qsonarr do not start anymore after one of latest QNAP updates.
I am unable to backup config using the UI.
What do I need to backup manually using filesystem?
I intend to install Sonarr 3 as QSonarr 2 could have been disabled by QNAP in the same way NZBget has been disabled...
Not Cool QNAP, not f...n cool!
I am unable to backup config using the UI.
What do I need to backup manually using filesystem?
I intend to install Sonarr 3 as QSonarr 2 could have been disabled by QNAP in the same way NZBget has been disabled...
Not Cool QNAP, not f...n cool!
-
- New here
- Posts: 5
- Joined: Sun May 11, 2014 1:52 pm
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
Did you figure this out - i am still having issues getting sonarr or radarr to work
-
- Know my way around
- Posts: 107
- Joined: Wed Apr 15, 2015 9:08 pm
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
No, I haven't. I think the database and config were deleted. I don't know.
-
- New here
- Posts: 5
- Joined: Sun May 11, 2014 1:52 pm
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
Hey antaker - sorted my issue.
I had to remove mono and find install an x86 version for the qnap. After that it all came back to life
I had to remove mono and find install an x86 version for the qnap. After that it all came back to life
-
- New here
- Posts: 5
- Joined: Thu Jan 17, 2013 8:45 pm
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
trp wrote: ↑Fri Aug 24, 2018 9:43 pm *BUMP*
Apologies, but would love some guidance or suggestions here if anyone has any ideas?
Thanks in advance..
trp wrote:Hi there, I'm having issues with my install of QSonarr (configuration below).
Once a download completes (using SAB), QSonarr reports that it is "Unable to determine if file is a sample" for EVERY download.
Whilst I can perform a Manual Import, I would like to get this working... Does anyone have any suggestions, please?
System configuration notes:
NAS: TS-459
Firmware: 4.2.6
QMono: 5.4.1.6.0 (x86)
QSonarr: 2.0.0.5163 (x86) - updated in app to 2.0.0.5228
QSonarr - Status (warning): MediaInfo Library could not be loaded libmediainfo.so.0
QSonarr - Settings/Media Management/Permissions - both file and folder chmod are 0777
SABnzbdplus 180427 via SHERPA
SAB config: User Folders/Permissions for completed downloads: 777
Try installing this - fixed the error for me
https://www.qnapclub.eu/en/qpkg/712
-
- New here
- Posts: 3
- Joined: Tue Nov 03, 2015 3:52 am
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
Hi
After a minor disaster with a raid group I re-initialised my NAS. Everything was fine - time to re-install Sonarr, Radarr and NZBGET.
NAS: TS453Pro
Firmware: 4.4.1.1086 / 64bit
Memory: 8GB
QMono: 5.20.1.19
QSonarr: 2.0.0.5163
QNZBGet: 21.0.0
All installed with no problem - initialised QSonarr Series from disk (no problem) but the minute QSonarr starts processing (Scanning / RSS Sync) cpu usage spikes and memory usage climbs, to the point (>6GB) that I have to kill QSonarr to allow the NAS to continue operating !
I have been using QSonarr / QRadarr / QNZBGet for years without any issue so any insights would be greatly appreciated
After a minor disaster with a raid group I re-initialised my NAS. Everything was fine - time to re-install Sonarr, Radarr and NZBGET.
NAS: TS453Pro
Firmware: 4.4.1.1086 / 64bit
Memory: 8GB
QMono: 5.20.1.19
QSonarr: 2.0.0.5163
QNZBGet: 21.0.0
All installed with no problem - initialised QSonarr Series from disk (no problem) but the minute QSonarr starts processing (Scanning / RSS Sync) cpu usage spikes and memory usage climbs, to the point (>6GB) that I have to kill QSonarr to allow the NAS to continue operating !
I have been using QSonarr / QRadarr / QNZBGet for years without any issue so any insights would be greatly appreciated
-
- Starting out
- Posts: 29
- Joined: Thu Oct 06, 2016 1:04 am
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
Is there a way to stop Appcenter from checking if there's a new version of QSonarr?
I mean I'm never going to update it in Appcenter anyway because of the builtin updater in QSonarr which is much quicker on releases.
I mean I'm never going to update it in Appcenter anyway because of the builtin updater in QSonarr which is much quicker on releases.
QNAP TS-451+ - mainly used for Kodi and containers
Upgraded to 16 GB RAM (Crucial DDR3L 1600 MHz SODIMM CT102464BF160B)
Seagate IronWolf 2TB drives (ST2000VN004) in RAID 5
Upgraded to 16 GB RAM (Crucial DDR3L 1600 MHz SODIMM CT102464BF160B)
Seagate IronWolf 2TB drives (ST2000VN004) in RAID 5
-
- New here
- Posts: 3
- Joined: Sat Jun 01, 2013 9:38 am
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
so weirdly enough since the last qsonarr update im getting this error message too, but unfortunately downloading and installing that package didnt help - is there some kind of symlink breakage going on?bassar wrote: ↑Thu Aug 29, 2019 10:01 pmtrp wrote: ↑Fri Aug 24, 2018 9:43 pm *BUMP*
Apologies, but would love some guidance or suggestions here if anyone has any ideas?
Thanks in advance..
trp wrote:Hi there, I'm having issues with my install of QSonarr (configuration below).
Once a download completes (using SAB), QSonarr reports that it is "Unable to determine if file is a sample" for EVERY download.
Whilst I can perform a Manual Import, I would like to get this working... Does anyone have any suggestions, please?
System configuration notes:
NAS: TS-459
Firmware: 4.2.6
QMono: 5.4.1.6.0 (x86)
QSonarr: 2.0.0.5163 (x86) - updated in app to 2.0.0.5228
QSonarr - Status (warning): MediaInfo Library could not be loaded libmediainfo.so.0
QSonarr - Settings/Media Management/Permissions - both file and folder chmod are 0777
SABnzbdplus 180427 via SHERPA
SAB config: User Folders/Permissions for completed downloads: 777
Try installing this - fixed the error for me
https://www.qnapclub.eu/en/qpkg/712
-
- Starting out
- Posts: 19
- Joined: Sat Nov 02, 2013 9:28 pm
Re: [QSonarr] [2.0.0.5153] Smart PVR for newsgroup and bittorrent users
I am having the exact same issue. I've tried installing that package. I did check that the libmediainfo files are in the PATH and can be found. Both Radarr and QSonar give me this error.
QSonar version
2.0.0.5338
Mono Version
5.20.1.19
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [QSonarr] [2.0.0.5338] Smart PVR for newsgroup and bittorrent users
updated
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- First post
- Posts: 1
- Joined: Wed Jun 14, 2017 6:46 pm
Re: [QSonarr] [2.0.0.5338] Smart PVR for newsgroup and bittorrent users
I am still getting the "MediaInfo Library could not be loaded libmediainfo.so.0" error and I have installed the updated release?
Also started getting RAM disk errors which i wasn't before. unsure if they are related?
Sonarr Version
2.0.0.5338
Mono Version
5.20.1.19
MediCLI version
18.12.1 (installed 5/2/20)
Also started getting RAM disk errors which i wasn't before. unsure if they are related?
Sonarr Version
2.0.0.5338
Mono Version
5.20.1.19
MediCLI version
18.12.1 (installed 5/2/20)