What is your serverhost listening address?
Code: Select all
grep serverhost /share/CACHEDEV1_DATA/.qpkg/OWatcher3/config/config.ini
What is your serverhost listening address?
Code: Select all
grep serverhost /share/CACHEDEV1_DATA/.qpkg/OWatcher3/config/config.ini
The job ran ok lots of modules listed including eol.py. Ended with a message comit before you abort?OneCD wrote: ↑Fri Jan 31, 2020 11:22 amstarted
Can you please SSH in again as 'admin' and run a manual git pull?Code: Select all
cd /share/HDA_DATA/Qdownload/nzbToMedia && git pull
OK, that output is what I need to see.
Let's get nzbToMedia up-to-date before using it for post-processing.
my serverhost is pointing to 192.168.0.12OneCD wrote: ↑Fri Jan 31, 2020 11:28 amWhat is your serverhost listening address?It should be 0.0.0.0Code: Select all
grep serverhost /share/CACHEDEV1_DATA/.qpkg/OWatcher3/config/config.ini
Can you edit that file so it's 0.0.0.0?
Can you please SSH in again as the 'admin' user, run the following commands and paste the result back here?Rodneysb wrote: ↑Sat Feb 01, 2020 8:48 am [ fail ] A required NAS system share is missing [/share/Download]. Please re-create it via the QTS Control Panel -> Privilege Settings -> Shared Folders.
...
[ dbug ] (**) NAS : default volume: /share/CACHEDEV1_DATA
...
[ dbug ] (**) NAS : /opt: not present
[ dbug ] (**) NAS : /share/Download: not present!
Code: Select all
ll /; echo; ll /share/
I modified the nzbtomedia.py and autoprocess.cfg to add parameters for sickchill tight from the start..OneCD wrote: ↑Sat Feb 01, 2020 3:29 amOK, that output is what I need to see.Let's get nzbToMedia up-to-date before using it for post-processing.
Can you please run another manual git pull on nzbToMedia and post the output? I need to see why it suggested a "commit before abort". It sounds like one or more of the base files have been manually changed.
Modifying any of the cloned files will result in an error when pulling via git. It's OK to edit [autoProcessMedia.cfg] as that file isn't part of the remote repo (it begins life as a copy of [autoProcessMedia.cfg.spec]), but any other mods will cause problems.
Code: Select all
cd /share/HDA_DATA/Qdownload/nzbToMedia && git reset --hard && git pull
OneCD wrote: ↑Sat Feb 01, 2020 3:29 amOK, that output is what I need to see.Let's get nzbToMedia up-to-date before using it for post-processing.
Can you please run another manual git pull on nzbToMedia and post the output? I need to see why it suggested a "commit before abort". It sounds like one or more of the base files have been manually changed.
omg it works!! Thanks so much! I remember changing that setting. 0.0.0.0 sets it to whatever IP it's using?jkcchan wrote: ↑Sat Feb 01, 2020 8:35 ammy serverhost is pointing to 192.168.0.12OneCD wrote: ↑Fri Jan 31, 2020 11:28 amWhat is your serverhost listening address?It should be 0.0.0.0Code: Select all
grep serverhost /share/CACHEDEV1_DATA/.qpkg/OWatcher3/config/config.ini
0.0.0.0 tells the app to listen to (and respond to) any-and-all network interfaces on the host machine that have been assigned IPv4 addresses, no matter what each one actually is. https://en.wikipedia.org/wiki/0.0.0.0
LazyLibrarian doesn't ship with a config file - it's auto-generated on first-run. Yes, it's possible you specified a different IP listening address other than 0.0.0.0
Sorry, my explanation could have been better. I only meant that the lack of a default config file (and I also don’t have a running instance of this app) means I was unable to advise as to the key name to search-for in the config.