So, I finally got this to work, took WAY too long for such a simple operation.
This should be documented FIRST, BEFORE going OFF into other detailed operations.
Anywho, here is my simple stup, I don't know how "official", or if it conforms to recommended setup, or not.
I would like comments if you have any.
ALL the adapters have the same IP.
share files between VM & NAS
-
buggz
- Starting out
- Posts: 46
- Joined: Fri Jul 03, 2020 12:10 pm
share files between VM & NAS
Last edited by buggz on Fri Jul 24, 2020 11:06 pm, edited 1 time in total.
-
buggz
- Starting out
- Posts: 46
- Joined: Fri Jul 03, 2020 12:10 pm
Re: share files between VM & NAS
You do not have the required permissions to view the files attached to this post.
-
Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: share files between VM & NAS
Making it too complicated. Install VM OS (i.e. Windows) connect to NFS/SMB share in Windows. Share is hosted on NAS.
See here for information:
https://www.qnap.com/en/how-to/tutorial ... n-station/
See here for information:
https://www.qnap.com/en/how-to/tutorial ... n-station/
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
buggz
- Starting out
- Posts: 46
- Joined: Fri Jul 03, 2020 12:10 pm
Re: share files between VM & NAS
Oh believe me, I tried to do this, as I thought that is how it should work.
But it did not, this was the only way I could see the NAS share.
I have another VM to load, so, I will try again.
I am awaiting two 32MB Samsung SODIMMS first...
But it did not, this was the only way I could see the NAS share.
I have another VM to load, so, I will try again.
I am awaiting two 32MB Samsung SODIMMS first...
-
buggz
- Starting out
- Posts: 46
- Joined: Fri Jul 03, 2020 12:10 pm
Re: share files between VM & NAS
Could this be because I have two computers connected to the NAS, TVS-872XT ?
One is via 1GB Ethernet, the other via Thunderbolt 3.
One is via 1GB Ethernet, the other via Thunderbolt 3.