TS-412

Introduce yourself to us and other members here, or share your own product reviews, suggestions, and tips and tricks of using QNAP products.
Post Reply
trident506
New here
Posts: 8
Joined: Mon Jun 22, 2020 1:36 am

TS-412

Post by trident506 »

my TS-412 is so slow it has become unusable. what can I do.
User avatar
OneCD
Guru
Posts: 12038
Joined: Sun Aug 21, 2016 10:48 am
Location: "... there, behind that sofa!"

Re: TS-412

Post by OneCD »

Hi and welcome to the forum. :)

What are you running on that old NAS? Which services, QPKGs and firmware?

ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage
trident506
New here
Posts: 8
Joined: Mon Jun 22, 2020 1:36 am

Re: TS-412

Post by trident506 »

The last update was to firmware 4.3.3
I can get to the files when there is a mapped drive. I am trying to get the files off, (copy to a new 932x. I be lucky to see transfers of 1.4 MB, but mostly in the low kb range.
I think that the O.S. drive is full, but I can't get to it.
Web access is next to impossible. If It does load, the file app does not shoe files.
So, having d=said all that, If I can get the files I need, I would do a factory reset.
User avatar
dolbyman
Guru
Posts: 35021
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: TS-412

Post by dolbyman »

ssh into the nas and delete some files off the full volume

then try again
trident506
New here
Posts: 8
Joined: Mon Jun 22, 2020 1:36 am

Re: TS-412

Post by trident506 »

sorry for my lack of expertise, but I do not know how to "ssh"
User avatar
dolbyman
Guru
Posts: 35021
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: TS-412

Post by dolbyman »

https://en.wikipedia.org/wiki/Secure_Shell

the how depends on the used operating system of you computer

if it is windows use this
https://www.putty.org/
trident506
New here
Posts: 8
Joined: Mon Jun 22, 2020 1:36 am

Re: TS-412

Post by trident506 »

dolbyman
I did use Putty, but could not fix the problem.
I did manage to get the files I needed, then did a hard reset.
All's good now. wish I had done that sooner.
Thanks for your help!
Post Reply

Return to “Users' Corner”