did you run the command? whats the result?
TS-253D Memory Upgrade
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253D Memory Upgrade
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 6
- Joined: Wed Oct 21, 2020 7:13 am
Re: TS-253D Memory Upgrade
Thanks,jaysona wrote: ↑Wed Nov 04, 2020 5:38 am
The reason it works is because - in the case of your TS-253D - is because the Memory Controller and DDR Memory Interface are design to address that amount of space. That does not necessarily mean that the system the SoC is integrated in has the necessary circuitry to address the maximum amount of physical memory the CPU is capable of addressing.
But wait.... What It means?
The system Will ir Will not make use of all that memory?
Lets say I install 32gbram... What happens if i try to run 10 virtual machines each using 3gb ram?
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253D Memory Upgrade
run the command to confirm how much ram you will be actually using. and report back here the result
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 6
- Joined: Wed Oct 21, 2020 7:13 am
Re: TS-253D Memory Upgrade
Yeahh, i really would like to se R1200 answer....
-
- New here
- Posts: 9
- Joined: Mon Apr 07, 2008 9:09 am
Re: TS-253D Memory Upgrade
dmidecode -t 16 result
System Memory
Maximum Capacity: 32 GB
Number of devices : 2
System Memory
Maximum Capacity: 32 GB
Number of devices : 2
-
- First post
- Posts: 1
- Joined: Tue Nov 17, 2020 5:29 am
Re: TS-253D Memory Upgrade
I am very interested in the answer to this question. I want to buy TS-251D-4GB, but if I can update the RAM for cheap, maybe I can buy TS-251-2g and with the left money I will upgrade it with 2x8 or 2x4 at least. So can we combine QNAP and a non-QNAP module or just use 2 x non-QNAP modules ?
-
- Getting the hang of things
- Posts: 69
- Joined: Tue Feb 21, 2017 10:59 am
- Location: Vancouver, Canada
Re: TS-253D Memory Upgrade
I found this video from the NasCompares guy quite helpful :
https://www.youtube.com/watch?v=TgL4DBzg6CI
https://www.youtube.com/watch?v=TgL4DBzg6CI
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253D Memory Upgrade
but all he does is put in the ram and just sees in the nas it shows how much ram is shown. but like some others pointed out, that may not necessarily mean you can actually use beyond the official 8gb. rob doesn't really take that into accountDavid Morrow wrote: ↑Fri Nov 20, 2020 4:59 am I found this video from the NasCompares guy quite helpful :
https://www.youtube.com/watch?v=TgL4DBzg6CI
what qnap model?
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 6
- Joined: Wed Oct 21, 2020 7:13 am
Re: TS-253D Memory Upgrade
Hy,
So, there is still a very lively discussion about the limit of memory that we can use, but although I am one of those eager to see the result of this discussion, there is something else I need to ask.
Whereas the system uses SODIMM 2400 MT/s, I need to know if it would work with a similar 2666 MT/s memory.
If I remember correctly, I believe it would work at 2400MT/s, that is, without taking advantage of all the speed of memory, and I ask you to be kind enough to confirm or correct me.
Thanks
So, there is still a very lively discussion about the limit of memory that we can use, but although I am one of those eager to see the result of this discussion, there is something else I need to ask.
Whereas the system uses SODIMM 2400 MT/s, I need to know if it would work with a similar 2666 MT/s memory.
If I remember correctly, I believe it would work at 2400MT/s, that is, without taking advantage of all the speed of memory, and I ask you to be kind enough to confirm or correct me.
Thanks
-
- Starting out
- Posts: 10
- Joined: Mon Nov 25, 2013 4:20 am
Re: TS-253D Memory Upgrade
I just upgraded my new TS-253D with the 2 4GB 2666 that came out of my 2018 Mac Mini. Device booted fine, reporting 8GB ram, all services are running fine and no errors.psidrj wrote: ↑Sat Nov 21, 2020 11:46 pm Hy,
So, there is still a very lively discussion about the limit of memory that we can use, but although I am one of those eager to see the result of this discussion, there is something else I need to ask.
Whereas the system uses SODIMM 2400 MT/s, I need to know if it would work with a similar 2666 MT/s memory.
If I remember correctly, I believe it would work at 2400MT/s, that is, without taking advantage of all the speed of memory, and I ask you to be kind enough to confirm or correct me.
Thanks
-
- Starting out
- Posts: 34
- Joined: Sun Sep 04, 2016 2:18 am
Re: TS-253D Memory Upgrade
Not a TS-253D... A TS-653D... But it's the same MB IIUC and only the backplane for the drives is a different size
I failed with a single 16 GB SODIMM (A CT16G4SFRA266, it doesn't get past the second green drive light on the boot sequence). Which presumably indicates a memory issue.
I retried with 2x CT8G4SFRA266 8GB SODIMMS and that has booted (16GB available). And is running fine
I failed with a single 16 GB SODIMM (A CT16G4SFRA266, it doesn't get past the second green drive light on the boot sequence). Which presumably indicates a memory issue.
I retried with 2x CT8G4SFRA266 8GB SODIMMS and that has booted (16GB available). And is running fine
-
- New here
- Posts: 9
- Joined: Mon Apr 07, 2008 9:09 am
Re: TS-253D Memory Upgrade
TS-253D as per OP and Header
-
- New here
- Posts: 9
- Joined: Mon Apr 07, 2008 9:09 am
Re: TS-253D Memory Upgrade
Confirmedpsidrj wrote: ↑Sat Nov 21, 2020 11:46 pm Hy,
So, there is still a very lively discussion about the limit of memory that we can use, but although I am one of those eager to see the result of this discussion, there is something else I need to ask.
Whereas the system uses SODIMM 2400 MT/s, I need to know if it would work with a similar 2666 MT/s memory.
If I remember correctly, I believe it would work at 2400MT/s, that is, without taking advantage of all the speed of memory, and I ask you to be kind enough to confirm or correct me.
Thanks
- Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: TS-253D Memory Upgrade
so can anyone explain why a model like the x32d can register 32gb successfully when supposedly it only maxes out 8gb? (according to qnap, and intel and other rando sources that suggest a hard limit due to cpu limitation on the ram capacity supported)
here is the official reply by intel on this
other sauce
https://forums.tomshardware.com/threads ... s.3041679/
or is doing that dmi not the best way to test for this? or what :X
also how is this fella able to boot 32gb, while rob's own test on a x53d couldn't even boot?
https://www.youtube.com/watch?v=TgL4DBzg6CI&t=888s
also there is discussion by others that although ram registering more than 8gb, that the nas may actually be using beyond 8gb. but when it was suggested that the dmi code would show conclusively how much ram the nas actually uses, the fellas result showed 32gb. any explanation would be appreciated thx
this other guy on the intel forum is also asking the same thing
so maybe that could explain why 32gb didn't work for rob, but it did for some other user. but just how stable would the nas be when using ram out of official spec? would doing this increase chances of random reboots? because that to me would definitely be unacceptable (had bad experiences with rrs in the past)
here is the official reply by intel on this
https://community.intel.com/t5/Processo ... d-p/406408Community Manager-
I would like to let you know that the processor in question is an Intel® System on Chip (SoC) processor. For this model there is a Max Memory Size supported; however, in this case it is dependent on memory type used for the SoC. And, in this case the computer manufacturer in the one that decides which memory type and the maximum supported for their particular computer model. Our datasheet: https://www.intel.com/content/www/us/en ... es-datashe... Intel® Pentium® and Celeron® Processor N and J Series: Datasheet 1, states that the maximum size supported is 8 GB, and that the densities (4,8,12 or 16 GB) varies depending on the memory used(LPDDR4, LPDDR3 or DDR3L), but it is up to the computer manufacturer to define which will be the maximum for their specific model. See below for the table 3.2 Specifics of Supported Memory Technologies(page 63).
Please let me know if this helps.
Regards,
Amy C.
other sauce
https://forums.tomshardware.com/threads ... s.3041679/
or is doing that dmi not the best way to test for this? or what :X
also how is this fella able to boot 32gb, while rob's own test on a x53d couldn't even boot?
https://www.youtube.com/watch?v=TgL4DBzg6CI&t=888s
also there is discussion by others that although ram registering more than 8gb, that the nas may actually be using beyond 8gb. but when it was suggested that the dmi code would show conclusively how much ram the nas actually uses, the fellas result showed 32gb. any explanation would be appreciated thx
this other guy on the intel forum is also asking the same thing
https://community.intel.com/t5/Processo ... -p/1222690n_scott_pearson-copperhead-
Intel Celeron J4125 -- Max Memory is 32GB **not** 8GB ...
I'm trying to conclusively prove the QNAP TS-453D NAS is capable of more than 8GB ram. The NAS utilizes the Intel Celeron J4125 SoC. Both Intel and QNAP state the maximum ram to be 8GB, however, many have tried 16GB & 32GB claiming it to run fine. MEMTEST was recently performed on the NAS using 32GB (2x 16GB Crucial DDR4 2666MHZ) and it PASSED.
Intel experts, could you please explain this MEMTEST vs Intel stated Memory Maximum paradox?
Can the Intel Celeron J4125 SoC's memory controller access / handle more than 8GB DDR4 RAM, that is, can it access, without error, 32 GB ram?
What is the ACTUAL memory upper limit for this SoC?
Super User Retired Employee
Intel will not make claims regarding a capability that they have not tested for all cases. They may validate a part at a point in time where only 4GB/8GB SODIMMs were available. Over time, as available SODIMM sizes increase, the spec if not updated because the team isn't available to validate it -- or, there may be some corner cases which don't allow them to claim that the larger size works in all cases.
Hope this explains it. I would say that, using memory larger than that claimed in the specification, you are in a 'use at your own risk' situation.
so maybe that could explain why 32gb didn't work for rob, but it did for some other user. but just how stable would the nas be when using ram out of official spec? would doing this increase chances of random reboots? because that to me would definitely be unacceptable (had bad experiences with rrs in the past)
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
- R1200CL
- Starting out
- Posts: 28
- Joined: Tue Jul 21, 2015 4:28 am
- Location: Oslo
Re: TS-253D Memory Upgrade
I don’t understand. What command ?Moogle Stiltzkin wrote: ↑Wed Nov 04, 2020 11:29 am run the command to confirm how much ram you will be actually using. and report back here the result