QVR Pro 1.4 lot of CPU during playback (more than 70%)

[denisj]

Hi there all,
I just playback the video of one of my 4 cams (ONVIF)
and if I try 16X playback, the QVRPRO is blocked after some seconds.
If I try a 8X is blocked after 2 minutes aprox.
If I try a 4X is blocked after about 5 minutes.

I just so that my CPU is over 70% on QVRPRO APP like in the pictures.


Why is this happen please ?

Thanks a ll in advance
Denis

[QNAPAlanK]

Hi denisj

We had been improved the loading of playback at QVR Pro 2.0.0.0 version, if you upgrade to the version. It will lower the loading.
Besides, we fixed several issue at 2.0.0.1 version, it will be released within 2 weeks.
If you do not urgent, I suggest waiting for 2.0.0.1 version.

Thanks

[denisj]

Thanks for the answer
I already have the QvrPro 2.0 version.
Is there anything else that I can do ? ...like change the i5 CPU with i7 ?

Thanks again
Denis

[spile]

I would ignore those cpu reading in QVRPro. I’ve been getting them for months every so often and the performance of my NAS is fine.

[denisj]

Obviously I can ignore this... no problem
But the problem is that the APP is remaining blocked for some minutes.
If I restart the QvrPro then it will work again... until will be blocked again
This is happen only on playback from 4X thru 16X... please see my firs post.

Thanks
Denis

[spile]

The current release of QVRPRo does seem less reliable/stable. Perhaps it is worth waiting for the update.

[denisj]

We all hope

Denis