USB Wi-Fi as the only network adapter?

Discussion on setting up QNAP NAS products.
Post Reply
thehobbit30
New here
Posts: 9
Joined: Tue Sep 29, 2015 7:06 am

USB Wi-Fi as the only network adapter?

Post by thehobbit30 » Thu Apr 08, 2021 2:57 am

Hi,
I am trying to reconfigure my TS-253 Pro so that it connects to the network exclusively using the USB dongle (D-Link DWA-182).
The physical ethernet ports are disconnected and the Wi-Fi adapter does connect to the network, and in fact I can reliably use it to log into the server.

I am facing a few issues, though:

- The DNS resolution is unreliable. Irrespective of which DNS servers I configure (Google's, my broadband provider's), when the Wi-Fi adapter is set as the default gateway, the system will almost always fail to resolve hostnames. Every now and again, though, it does work, which is quite puzzling.

- The Wi-Fi adapter is not listed as a physical adapter in some contexts, e.g. Container Station.

Is it actually possible to use the USB Wi-Fi as the only network adapter?

Thanks

User avatar
dolbyman
Guru
Posts: 22732
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: USB Wi-Fi as the only network adapter?

Post by dolbyman » Thu Apr 08, 2021 3:40 am

If you HAVE to use WFi use a WiFi bridge connected to one of the LAN ports.. that works fine .. (albeit slow due to wifi)

Forget the USB sticks

Post Reply

Return to “Turbo Station Installation & Setup”