Please Help,
I wan't to install/update application in QNAP TS-251A use Raid-1, then appear error like picture/note in below :
"Failed to install, the system volume is missing".
how to solved it is ???
can't install/update application in QNAP TS-251A
-
- Starting out
- Posts: 11
- Joined: Tue Dec 08, 2020 10:26 am
can't install/update application in QNAP TS-251A
You do not have the required permissions to view the files attached to this post.
- dolbyman
- Guru
- Posts: 35243
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: can't install/update application in QNAP TS-251A
Do you have a system volume ?
-
- Experience counts
- Posts: 2043
- Joined: Thu Mar 03, 2016 1:11 am
Re: can't install/update application in QNAP TS-251A
What happened before?
When system volume is missing, some other issue must have been occured first.
Hope, you have an actual backup?
If, so, fastest way is to start from scratch and restore data.
Regards
When system volume is missing, some other issue must have been occured first.
Hope, you have an actual backup?
If, so, fastest way is to start from scratch and restore data.
Regards
A raid is never a substitute for backup! Never!
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
-
- Starting out
- Posts: 11
- Joined: Tue Dec 08, 2020 10:26 am
Re: can't install/update application in QNAP TS-251A
is like the picture in below ?
i have volume "DataVol1" with type thick volume.
You do not have the required permissions to view the files attached to this post.
-
- Starting out
- Posts: 11
- Joined: Tue Dec 08, 2020 10:26 am
Re: can't install/update application in QNAP TS-251A
nothing happend before.
yes, every week, i haved backup hdd by replace disk 2.
-
- Experience counts
- Posts: 2043
- Joined: Thu Mar 03, 2016 1:11 am
Re: can't install/update application in QNAP TS-251A
That is not a valid backup!
If there will be an error (i.e. like the missing system volume, the error is at this drive too).
So power down NAS, remove both drives and insert your "backup drive". If system starts and a system volume is available, you are lucky.
In addition: the backplane connectors are not made for continues use of plug-and-pull disks. They have a limited lifetime.
If your NAS starts up with the backup drive (raid is degraded) you need to remove all partitions at one of the pulled disks, insert the disk and wait until rebuild is done prior taking further steps.
Adding a second disk without removing partition will end in a mess!
Regards
If there will be an error (i.e. like the missing system volume, the error is at this drive too).
So power down NAS, remove both drives and insert your "backup drive". If system starts and a system volume is available, you are lucky.
In addition: the backplane connectors are not made for continues use of plug-and-pull disks. They have a limited lifetime.
If your NAS starts up with the backup drive (raid is degraded) you need to remove all partitions at one of the pulled disks, insert the disk and wait until rebuild is done prior taking further steps.
Adding a second disk without removing partition will end in a mess!
Regards
A raid is never a substitute for backup! Never!
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com