Nas will not power on
-
- Know my way around
- Posts: 149
- Joined: Sat Aug 15, 2020 11:33 pm
Nas will not power on
Hi all, before I left for vacation I shutdown my ts-653d and unplugged it. When I came back a week later, I plugged it back in but now it won’t turn on. I notice a buzzing sound coming from the “brick” of the power supply and the little green light is on. If I unplug the power from the wall, the buzzing stops. If it’s plugged into the wall but I unplug the power from the back of the nas, the buzzing also stops. Do you think the problem is with the power supply or the nas itself? Thanks.
- OneCD
- Guru
- Posts: 12509
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: Nas will not power on
Hard-to-say, it could be either.
Try ejecting the HDDs (no-need to eject them fully, just enough so they're not plugged-in), then power-on the NAS. Does it start without the drives connected?
Try ejecting the HDDs (no-need to eject them fully, just enough so they're not plugged-in), then power-on the NAS. Does it start without the drives connected?
-
- Know my way around
- Posts: 149
- Joined: Sat Aug 15, 2020 11:33 pm
Re: Nas will not power on
Tried that and it still doesnt power on. I ordered another third party power adapter. Hopefully it wont burn down my house. The brand is called UpBright. The oem from qnap is out of stock.
https://www.amazon.ca/dp/B0CTB8SDZ8/
https://www.amazon.ca/dp/B0CTB8SDZ8/