[ NextCloud ] [ 15.0.5 ] OwnCloud Fork

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
User avatar
Skeptical.me
Easy as a breeze
Posts: 370
Joined: Sun Jun 05, 2016 8:58 am
Location: Australia

Re: [ NextCloud ] [ 13.0.2 ] OwnCloud Fork

Post by Skeptical.me » Thu May 10, 2018 11:17 am

OneCD wrote:This one? ;)

https://qnapclub.eu/en/qpkg/348


ahhh, they're charging a whole euro for it lol. Well, so they shouldd. People spend their time on these things and time = money.

If they could make NextCloud just simply install without having to learn Command Line I'd pay 50 eruo lol
QNAP TS-253Be 8GB, 2 x WD Red 6TB, & 1 x WD Red 6TB & WD 4TB Externals, QM2-2S M.2 500GB SSD Cache Acceleration, QTS: 4.3.6.0875

ASUS RT-AX88U WRT-Merlin Firmware 384.9 (AMTM, Pixelserv, Entware, Diversion & Skynet),

2017 iMac 27" 5K i5 3.5GHz 64GB 1TB & Thunderbolt 3 500GB M.2 External Boot Drive Radeon Pro 575 4GB, Raspberry Pi (NextCloudPi) 6TB.

QVPN, Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Download Station, QVR Pro, Duplicati, Bliss (Unlimited)

dehein2
Starting out
Posts: 25
Joined: Fri Oct 07, 2011 5:32 pm

Re: [ NextCloud ] [ 13.0.2 ] OwnCloud Fork

Post by dehein2 » Sun Jun 03, 2018 7:34 pm

Hi,

fist of all thanks a lot for the work. I've got one question/issue:

I tried to follow the steps to use SSL with the installation. I'm running a QNAP with a letsencrypt certificate installed via the QTS Gui. It work fine with the qnap apps.
After changing the 3 lines in the config file as described i get the following messages depending on browser/app when trying to access nextcloud with an external link. (example from local but same error with external adress)
error.png

phone.png



Without https it works but is obviously not safe:
local1.png


Is 45080 even the right port for https?

Thanks a lot
Dennis
You do not have the required permissions to view the files attached to this post.

raidforsaving
Know my way around
Posts: 223
Joined: Mon Jul 14, 2014 9:14 am

Re: [ NextCloud ] [ 13.0.2 ] OwnCloud Fork

Post by raidforsaving » Sun Jun 03, 2018 10:24 pm

dehein2 wrote:Is 45080 even the right port for https?



that port is for HTTP, not HTTPS

HTTP : 45080
HTTPS : 45083
Model name: TS-651
CPU: Intel(R) Celeron(R) CPU J1800 @ 2.41GHz
Firmware version: 4.3.5.0760(20181114)
Volumes: EXT4, Encrypted volume

dehein2
Starting out
Posts: 25
Joined: Fri Oct 07, 2011 5:32 pm

Re: [ NextCloud ] [ 13.0.2 ] OwnCloud Fork

Post by dehein2 » Mon Jun 04, 2018 1:28 am

perfect - thanks a lot ;)

User avatar
Skeptical.me
Easy as a breeze
Posts: 370
Joined: Sun Jun 05, 2016 8:58 am
Location: Australia

Re: [ NextCloud ] [ 13.0.2 ] OwnCloud Fork

Post by Skeptical.me » Mon Jun 11, 2018 10:33 pm

OneCD wrote:This one? ;)

https://qnapclub.eu/en/qpkg/348


Is there actually a guide now for setting up NextCloud on QNAP's now, I'll pay the Euro and install it if there is. I installed the qother one Stephane has a link to, it uses the QNAP's SSL Cert. and doesn't depend on QApache. But there's no access the Admin page, which is unfortunate.

Yeah, anyway, if there's a guide that would be fantastic.
QNAP TS-253Be 8GB, 2 x WD Red 6TB, & 1 x WD Red 6TB & WD 4TB Externals, QM2-2S M.2 500GB SSD Cache Acceleration, QTS: 4.3.6.0875

ASUS RT-AX88U WRT-Merlin Firmware 384.9 (AMTM, Pixelserv, Entware, Diversion & Skynet),

2017 iMac 27" 5K i5 3.5GHz 64GB 1TB & Thunderbolt 3 500GB M.2 External Boot Drive Radeon Pro 575 4GB, Raspberry Pi (NextCloudPi) 6TB.

QVPN, Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Download Station, QVR Pro, Duplicati, Bliss (Unlimited)

User avatar
QNAP_Stephane
Experience counts
Posts: 2979
Joined: Wed Mar 27, 2013 1:00 am

Re: [ NextCloud ] [ 13.0.5 ] OwnCloud Fork

Post by QNAP_Stephane » Wed Jul 25, 2018 12:45 am

updated
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

yanuk
Getting the hang of things
Posts: 63
Joined: Mon Feb 08, 2016 9:45 am

Re: [ NextCloud ] [ 13.0.5 ] OwnCloud Fork

Post by yanuk » Mon Aug 13, 2018 10:21 am

Hi Stephane
The new version of Nextcloud doesn't seem to start up after reboot. I will need to manually run

Code: Select all

/opt/Nextcloud/Nextcloud.sh start 
after reboot. All other services runs fine though.
TS451
TS453

yanuk
Getting the hang of things
Posts: 63
Joined: Mon Feb 08, 2016 9:45 am

Re: [ NextCloud ] [ 13.0.5 ] OwnCloud Fork

Post by yanuk » Mon Aug 20, 2018 4:15 pm

yanuk wrote:Hi Stephane
The new version of Nextcloud doesn't seem to start up after reboot. I will need to manually run

Code: Select all

/opt/Nextcloud/Nextcloud.sh start 
after reboot. All other services runs fine though.

I found out why. Nextcloud started before Qapache, does anyone knows how to modify the order in which is gets started on boot?
TS451
TS453

ganekogorta
Starting out
Posts: 15
Joined: Sat Nov 21, 2009 7:31 am
Location: Bizkaia

[ NextCloud ] [ 13.0.5 ] OwnCloud Fork

Post by ganekogorta » Mon Aug 20, 2018 4:34 pm

Hi

I think you can use
https://www.qnapclub.eu/en/qpkg/508

Un saludo
Agur eta ondo ibili

User avatar
Skeptical.me
Easy as a breeze
Posts: 370
Joined: Sun Jun 05, 2016 8:58 am
Location: Australia

Re: [ NextCloud ] [ 13.0.5 ] OwnCloud Fork

Post by Skeptical.me » Tue Aug 21, 2018 11:30 am

yanuk wrote:
yanuk wrote:Hi Stephane
The new version of Nextcloud doesn't seem to start up after reboot. I will need to manually run

Code: Select all

/opt/Nextcloud/Nextcloud.sh start 
after reboot. All other services runs fine though.

I found out why. Nextcloud started before Qapache, does anyone knows how to modify the order in which is gets started on boot?


"Sort my qpkg's" from the qnap club repository worked well for me, it solved a lot of similar issues for me. And it does it all automatically. Easy.
QNAP TS-253Be 8GB, 2 x WD Red 6TB, & 1 x WD Red 6TB & WD 4TB Externals, QM2-2S M.2 500GB SSD Cache Acceleration, QTS: 4.3.6.0875

ASUS RT-AX88U WRT-Merlin Firmware 384.9 (AMTM, Pixelserv, Entware, Diversion & Skynet),

2017 iMac 27" 5K i5 3.5GHz 64GB 1TB & Thunderbolt 3 500GB M.2 External Boot Drive Radeon Pro 575 4GB, Raspberry Pi (NextCloudPi) 6TB.

QVPN, Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Download Station, QVR Pro, Duplicati, Bliss (Unlimited)

User avatar
QNAP_Stephane
Experience counts
Posts: 2979
Joined: Wed Mar 27, 2013 1:00 am

Re: [ NextCloud ] [ 14.0.0 ] OwnCloud Fork

Post by QNAP_Stephane » Wed Sep 12, 2018 6:00 pm

updated
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

yanuk
Getting the hang of things
Posts: 63
Joined: Mon Feb 08, 2016 9:45 am

Re: [ NextCloud ] [ 13.0.5 ] OwnCloud Fork

Post by yanuk » Fri Sep 14, 2018 2:08 pm

MooChoo2 wrote:
yanuk wrote:
yanuk wrote:Hi Stephane
The new version of Nextcloud doesn't seem to start up after reboot. I will need to manually run

Code: Select all

/opt/Nextcloud/Nextcloud.sh start 
after reboot. All other services runs fine though.

I found out why. Nextcloud started before Qapache, does anyone knows how to modify the order in which is gets started on boot?


"Sort my qpkg's" from the qnap club repository worked well for me, it solved a lot of similar issues for me. And it does it all automatically. Easy.

fantastic. Worked flawlessly now
TS451
TS453

User avatar
Skeptical.me
Easy as a breeze
Posts: 370
Joined: Sun Jun 05, 2016 8:58 am
Location: Australia

Re: [ NextCloud ] [ 14.0.0 ] OwnCloud Fork

Post by Skeptical.me » Fri Sep 14, 2018 2:11 pm

yanuk wrote:
MooChoo2 wrote:
yanuk wrote:
yanuk wrote:Hi Stephane
The new version of Nextcloud doesn't seem to start up after reboot. I will need to manually run

Code: Select all

/opt/Nextcloud/Nextcloud.sh start 
after reboot. All other services runs fine though.

I found out why. Nextcloud started before Qapache, does anyone knows how to modify the order in which is gets started on boot?


"Sort my qpkg's" from the qnap club repository worked well for me, it solved a lot of similar issues for me. And it does it all automatically. Easy.

fantastic. Worked flawlessly now


No worries, its a very handy .qpkg ... solved several issues I was having.


Sent from my iPad using Tapatalk Pro
QNAP TS-253Be 8GB, 2 x WD Red 6TB, & 1 x WD Red 6TB & WD 4TB Externals, QM2-2S M.2 500GB SSD Cache Acceleration, QTS: 4.3.6.0875

ASUS RT-AX88U WRT-Merlin Firmware 384.9 (AMTM, Pixelserv, Entware, Diversion & Skynet),

2017 iMac 27" 5K i5 3.5GHz 64GB 1TB & Thunderbolt 3 500GB M.2 External Boot Drive Radeon Pro 575 4GB, Raspberry Pi (NextCloudPi) 6TB.

QVPN, Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2, Download Station, QVR Pro, Duplicati, Bliss (Unlimited)

User avatar
QNAP_Stephane
Experience counts
Posts: 2979
Joined: Wed Mar 27, 2013 1:00 am

Re: [ NextCloud ] [ 14.0.1 ] OwnCloud Fork

Post by QNAP_Stephane » Thu Sep 27, 2018 2:30 am

updated to 14.0.1
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

deljones
Know my way around
Posts: 143
Joined: Wed Nov 16, 2011 7:26 am

Re: [ NextCloud ] [ 14.0.1 ] OwnCloud Fork

Post by deljones » Wed Oct 03, 2018 12:20 am

Hi

I have the universal version of Nextcloud 13.0.2 on my 269L which has been great. I have been able to do the updates but now trying to update to the latest or last 13.x.x.x I get the following error:

Check for expected files
The following extra files have been found:
: nextcloud

I have been able in the past to update the unversal NC13 since it came out but when I got to 0.0.2 I can't

Can anyone advise me

Thanx

Del

PS: I know that I can't run NC14 as the QNAP NAS does not support PHP7 but I'd like to update my current NC 13 to 13.0.6
QNAP 269L with 2 x 1TB drives, 3gig RAM
Firmware 4.3.4
Running: WordPress, Piwigo, ZenPhoto & Subsonic & Much much more!

Post Reply

Return to “Community Apps”