[ FHEM ] [ 5.9.0 ] Home Automation

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
Post Reply
User avatar
QNAP_Stephane
Experience counts
Posts: 3186
Joined: Wed Mar 27, 2013 1:00 am

[ FHEM ] [ 5.9.0 ] Home Automation

Post by QNAP_Stephane » Sun Jun 11, 2017 9:22 pm

Image

Source : https://fhem.de

Download :

X64 Version : https://www.qnapclub.eu/fr/qpkg/459

Dependency :

QPerl 5.26.0 +

Note :

Listen on port 8083 by default
other port use 7072 , 8084, 8085

Config file : /opt/fhem/fhem.cfg

About :

FHEM (TM) is a GPL'd perl server for house automation. It is used to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature / humidity / power consumption.

The program runs as a server, you can control it via web or smartphone frontends, telnet or TCP/IP directly.

In order to use FHEM you'll need a 24/7 server (NAS, RPi, PC, MacMini, etc) with a perl interpreter and some attached hardware like the CUL-, EnOcean-, Z-Wave-USB-Stick, etc. to access the actors and sensors. See the "Supported hardware" section below.

It is pronounced without the h, like in feminine.

Features

support for a lot of protocols used in house automation, audio/video devices, weather services, online calendars and more.
autocreating devices/logs when receiving data from a new device: start FHEM and watch how the plots of your sensors are appearing automatically.
logging events to files or a database, with regexp filters
notifying external programs or scripts when receiving certain events
timed commands (e.g. switching a lamp on from sunset till midnight)
lot of interfaces: simple text, JSON, XML, each of them over plain TCP/IP, SSL or HTTP.
modular architecture with currently over 430 modules, easy to add your special device
lot of frontends, choose your favorite

Supported protocols (small excerpt)

eQ3 spezifisch: HomeMatic, MAX!, FS20, EM1000, FHT80b, HMS, S300, ESA2000
KNX, ZWave, EnOcean, Philipps HUE, FRITZ!Dect, Intertechno, HomeEasy, X10
1Wire, Firmata, webio, panStamp, LIRC, JeeLink, RFXCOM/RFXTRX, Wireless M-Bus
Davis VantagePro2, Oregon Scientific, Allnet
TVs from LG, Panasonic, Philips, Samsung, Sony
Devices from Bose, Sonos, Squeezebox
Amplifier from Denon, Onkyo, Pioneer, YAMAHA
iTunes/AppleTV, Enigma2, XBMC/Kodi, MediaPortal, Plex
Alexa, HomeKit, HomeBridge
Last edited by QNAP_Stephane on Wed Dec 26, 2018 8:23 pm, edited 1 time in total.
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

olluz
Starting out
Posts: 31
Joined: Sun Feb 06, 2011 7:16 pm

Re: [ FHEM ] [ 5.8.0 ] Home Automation

Post by olluz » Sat Dec 01, 2018 6:08 am

@QNAP_Stephane
Any plans to update this to v5.9 ?

Thanks in advance
TVS-671 QTS 4.2 beta (2015/07/16)

olluz
Starting out
Posts: 31
Joined: Sun Feb 06, 2011 7:16 pm

Re: [ FHEM ] [ 5.8.0 ] Home Automation

Post by olluz » Fri Dec 21, 2018 5:02 am

Is that a "no" then ? :(
TVS-671 QTS 4.2 beta (2015/07/16)

User avatar
QNAP_Stephane
Experience counts
Posts: 3186
Joined: Wed Mar 27, 2013 1:00 am

Re: [ FHEM ] [ 5.8.0 ] Home Automation

Post by QNAP_Stephane » Fri Dec 21, 2018 5:56 am

Bit busy. I Will check

Envoyé de mon SM-G925F en utilisant Tapatalk

--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

olluz
Starting out
Posts: 31
Joined: Sun Feb 06, 2011 7:16 pm

Re: [ FHEM ] [ 5.8.0 ] Home Automation

Post by olluz » Mon Dec 24, 2018 4:55 am

thanks for the reply.

If you do find the time, replacing the 5.8 file with 5.9 should do it.

Thanks again!
TVS-671 QTS 4.2 beta (2015/07/16)

olluz
Starting out
Posts: 31
Joined: Sun Feb 06, 2011 7:16 pm

Re: [ FHEM ] [ 5.9.0 ] Home Automation

Post by olluz » Sun Dec 30, 2018 8:07 pm

thanks a lot!
TVS-671 QTS 4.2 beta (2015/07/16)

Post Reply

Return to “Community Apps”