QVR Pro 1.1.2 and Reolink cameras issues

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
nikonvulcano
Getting the hang of things
Posts: 58
Joined: Sun Aug 16, 2015 7:04 pm

QVR Pro 1.1.2 and Reolink cameras issues

Post by nikonvulcano » Sun Dec 02, 2018 7:08 pm

Hi,
a few months ago I bought 6 cameras Reolink RLC-410 5 MP. They are very valid.

I have a TVS-463 with 16 GB RAM and QTS 4.3.5.0760 (2018/11/14) and QVR Pro 1.1.2.
The system is all updated, but the issues have been there for months.

Here are what they are:

1-very high CPU load (up to 99%)

2-some camera (in random mode) cannot connect all at the same time; at least one or two don’t connect. The only solution (but I don’t want) is setting all cameras a lower bitrate. Actually the settings are: resolution 2560*1920 framerate 25 fps bitrate 4096 kbps codec H264. To work correctly all at the same time I have to set up 2048 kbps, but the image are bad.

3-the motion detection in GUI camera it is disable from NAS: I enabled Motion Detection in camera GUI, but when I stop and restart QVR Pro or I reboot the NAS, or I stop and Restart the camera package plugin, the motion detection in camera GUI it is disabled.

It is from August that I have tickets open but we cannot reach any solution.

P.S. the cameras is ok and updated to last firmware and work good with their monitoring software.

Can someone help me?

Thank you all
bye
You do not have the required permissions to view the files attached to this post.
TVS-463 - 16GB RAM - QTS 4.3.6

QNAPAlanK
QNAP Staff
Posts: 108
Joined: Wed Sep 16, 2015 2:15 pm

Re: QVR Pro 1.1.2 and Reolink cameras issues

Post by QNAPAlanK » Sun Dec 02, 2018 9:03 pm

Hello

If stop QVR Pro, how high CPU usage?
Besides, please try QVR Pro 1.2.0
Get from it:
viewtopic.php?f=187&t=145099

Thanks

nikonvulcano
Getting the hang of things
Posts: 58
Joined: Sun Aug 16, 2015 7:04 pm

Re: QVR Pro 1.1.2 and Reolink cameras issues

Post by nikonvulcano » Sun Dec 02, 2018 10:07 pm

Hi,
if I stop Qvr the CPU runs at 30% about.

thanks
TVS-463 - 16GB RAM - QTS 4.3.6

wilko_jay
New here
Posts: 5
Joined: Tue Jan 29, 2019 6:13 am

Re: QVR Pro 1.1.2 and Reolink cameras issues

Post by wilko_jay » Mon Apr 15, 2019 4:21 am

Did you ever get to the bottom of this?

nikonvulcano
Getting the hang of things
Posts: 58
Joined: Sun Aug 16, 2015 7:04 pm

Re: QVR Pro 1.1.2 and Reolink cameras issues

Post by nikonvulcano » Mon Apr 15, 2019 4:25 am

Unfortunately no.
My NAS have got a lot of problems specially with surveillance.
Bye
TVS-463 - 16GB RAM - QTS 4.3.6

Post Reply

Return to “Surveillance Solution”