Seagate Ironwolf SMART raw values

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Post Reply
nikonvulcano
Getting the hang of things
Posts: 62
Joined: Sun Aug 16, 2015 7:04 pm

Seagate Ironwolf SMART raw values

Post by nikonvulcano » Wed Dec 12, 2018 5:16 am

Hi
I have a TVS-463 with the last QTS 4.3.6.0776 (2018-11-30).
I bought a new hard disk because the old is "abnormal" status: the new is a Seagate Iron Wolf 4 TB model ST4000VN008-2DR166 in the compatibility list.

The status of the new is OK !! And it seems to work correctly.

But in the SMART STATUS the are a lot of RAW Values unreadable for human and very high.

For example the temperature is RAW VALUE 81604378654, while in Disk Healt Summary panel is 30°C/86°F

Please look at the attachments.

The are the following strange values:

raw read error rate
seek error rate
power on hours
airflow temperature cel
termperature celsius
head flyng hours
total LBA written
total LBA read

I want to point out once again that the disk is new and "GOOD" for the nas.

Could it be an incompatibility from QTS SMART system and the disk?
The other disks are all ok: 2 WD RED WD40EFRX and 1 WD Purple WD40PURZ. For this the SMART raw values is human readable, and ok !!

The last question: why is the IronWolf Health Manager in the Disk Health NOT AVAILABLE? I bought this brand and model for the better compatibility and integration with QNAP.

Thanks
bye
You do not have the required permissions to view the files attached to this post.
TVS-463 - 16GB RAM - QTS 4.3.6

dolbyman
Guru
Posts: 15201
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Seagate Ironwolf SMART raw values

Post by dolbyman » Wed Dec 12, 2018 6:01 am

good question .. best directed to QNAP support though (via ticket).. only users here, no QNAP support members

nikonvulcano
Getting the hang of things
Posts: 62
Joined: Sun Aug 16, 2015 7:04 pm

Re: Seagate Ironwolf SMART raw values

Post by nikonvulcano » Sun Dec 16, 2018 7:55 pm

Ticket opened. I'm waiting Qnap Support Reply.
thanks bye
TVS-463 - 16GB RAM - QTS 4.3.6

Ron1963
Easy as a breeze
Posts: 374
Joined: Wed Apr 28, 2010 9:22 pm

Re: Seagate Ironwolf SMART raw values

Post by Ron1963 » Wed Dec 19, 2018 9:35 pm

Based on your first screenshot your drive is recognized as an Ironwolf but no tests have been performed yet, so hence no health report yet available. You can either initiate a one time test (button: test) or set up a schedule (button: schedule test). This is how one of my drives looks like.
Capture.JPG
You do not have the required permissions to view the files attached to this post.
1x TS431, 1x TS251, 1x TS253

nikonvulcano
Getting the hang of things
Posts: 62
Joined: Sun Aug 16, 2015 7:04 pm

Re: Seagate Ironwolf SMART raw values

Post by nikonvulcano » Thu Dec 20, 2018 2:15 am

Hi,
thanks for your reply. What you say is true. But also the Helpdesk has found some issues ... I'm waiting of news ...
TVS-463 - 16GB RAM - QTS 4.3.6

Post Reply

Return to “Hardware & Software Compatibility”