How to Use QBoat Sunny to build WiFi Applications

QIoT technology to allow you to explore potential IoT business opportunities.
Smart home/Smart building/Smart City/
Post Reply
New here
Posts: 4
Joined: Tue Jul 23, 2019 4:39 pm

How to Use QBoat Sunny to build WiFi Applications

Post by Stevenmwshyu » Thu Jul 25, 2019 2:12 pm

Easy-to-read version : ... lications/

In this tutorial, we will use transfer information from DHT11 (connected to LinkIt 7697) to QBoat Sunny via HTTP. Then, the QIoT Suite Application will output the temperature every 30 seconds, and humidity every 60 seconds.

What You’ll Need:
QBoat Sunny
Files used: Download Here
MediaTek LinkIt 7697
DHT11 Temperature and Humidity Sensor
AP Wireless Router

Create and Setup QIoT Application :
Open QIoT Suite > IoT Applications > Import > select test.json

Connect the DHT11 to LinkIt 7697 :
VCC to 3V3
Signal to P3
Download and Install the Arduino IDE here
Open dht11-wifi.ino in Arduino IDE and change network SSID and password accordingly.

Upload dht11-wifi.ino to LinkIt 7697 via Arduino IDE.

Open the Serial Monitor (Ctrl + Shift + M). The serial monitor will show LinkIt’s IP address. Copy this IP address.

Connecting QIoT Suite to LinkIt
Head back to QIoT Suite and double-click the temp node.
Paste the DHT11’s temperature URL into the URL field, then give this node a name.
URL: http://<LinkIt’s IP>/temp
Name: temp
Click Done

Repeat Steps 1-3, for DHT11’s humidity URL.
URL: http://<LinkIt’s IP>/humi
Name: humid

Click Save.
Start the Application by pressing the start node, then observe the output data by going into the debug tab.

Post Reply

Return to “QIoT”