Memory upgrade for TS459Pro+

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Post Reply
titusc
Getting the hang of things
Posts: 55
Joined: Thu May 17, 2012 12:44 pm

Memory upgrade for TS459Pro+

Post by titusc » Thu Dec 26, 2013 7:01 pm

Hi, have been reading on here and understood the KVR1333D3S8S9_2G would work but have some questions. Please comment. Thanks.

2GB
http://www.kingston.com/dataSheets/KVR1333D3S8S9_2G.pdf
- Known to work for most people here.
- Only possible issue is receiving the ‘9905428-189.A00lf’ variant rather than ‘9931712-009.A00G’ variant as reported with the link below. In fact I'm not sure why this may be an issue because from what I understand the most important thing is we need to ensure that it's a single rank (ie 1R) based memory module. Whether it has 8 chips (ie 1Rx8) or 16 chips (ie 1Rx4) shouldn't matter I thought as the NAS is still going to use one CS (Chip Select) signal to address the full 64-bit bus. Does anyone have any idea why? :?:
http://blog.waja.info/2013/11/14/upgrad ... us-to-2gb/
- Here I found another variant on the following link. This appears to be neither ‘9905428-189.A00lf’ nor ‘9931712-009.A00G’. :?
http://item.taobao.com/item.htm?spm=a23 ... 5410029158

4GB
http://www.kingston.com/dataSheets/KVR13S9S8_4.pdf
- This is also a 1Rx8 design same as the KVR1333D3S8S9_2G. Any idea if this will work with my model which is using the Atom D525 chip which does support up to 4GB.

emesix
New here
Posts: 2
Joined: Wed Jul 14, 2010 2:27 am

Re: Memory upgrade for TS459Pro+

Post by emesix » Fri Jan 10, 2014 5:46 am

Well i have also fallen for the wrong kingston memory .....
Here is a replay from kingston on this subject:

Thank you for your email.

We have read carefully the description of the issue you made earlier.

The bottom line is that your is not a standard computer system. Therefore, we do
not support it.

As a consequence, we have never advise our recommended to use the module
KVR1333D3S8S9/2G .

Had you contacted us before, we would have provided you with the relevant
information before the purchase of this module.

We sincerely apologise that we have been unable to assist you on this occasion.

However, should you have further queries do not hesitate to contact us.

bridgesint
Starting out
Posts: 16
Joined: Mon May 06, 2013 11:35 am

Re: Memory upgrade for TS459Pro+

Post by bridgesint » Wed Mar 23, 2016 11:42 pm


Post Reply

Return to “Hardware & Software Compatibility”